Projects Alessandro likes and follows

Sort by:

ESP32 runs FabGL to produce VGA display

ESP32 VGA PS/2

land-boards.com

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

Vojislav Milanovic

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

GOODWIN GOODWIN

Hackaday Prize 2020

This is a robotic arm that will be able to paint paintings, it is made from cardboard, scraps, and Servos (quarantine project).

Robotic Painting Arm (made from cardboard)

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

Will introduce 10 free PCB design software and analyze the features of each software

10 Best Free PCB Layout Software

Resto-Mod Dungeons and Dragons Digital Dice Tower based on a 1975 Bell & Howell IMD-202 Digital Multimeter

1978 "Heathkit" D&D Digital Dice Tower

Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.

Zakhar the Robot

Andrei Gramakov

Small UPS with fix 3V3/1A output and adjustable 1.3 to 12V output, Li-Ion charger and protection

IoT UPS

...streams H264/265 RTSP. In addition to routing functions.

Router becomes video recorder for IP cameras

Electronic load that supports 3.3V-16V at 1A of current. Equipped with keypad, LCD, rotary encoder, STM32 Microcontroller and more!

Electronic Load 3.3V-16V 1A

experimental 2-player musical instrument

Dual Instrument

Small .net based software that allows simplest possible data visualization and logging from serial port

Serial Data Visualization

3D printing onto fabric!

Remoticon: How to 3D Print onto Fabric

Amplified nRF52832 development board featuring 30x higher (!!!) transmission power than a regular nRF52832. AND it is Arduino compatible!

N32 Long range Bluetooth development board

Nikolaj Andersson Nielsen

Robot on a tank chassis with a manipulator and FPV camera.

General purpose remote controlled mobile robot

A girl is standing on the balcony, admired for her beauty and innocence.

BalconyJuliet

Simple analog Sanitiser Dispenser (No-Contact) using 555 timer IC with auto cut-off timer (even with trigger). Cheap and No-Coding Solution.

555 Sanitizer Dispenser (With cut-Off)

Designing a memory controller and OS interface to support multitasking on a 6502 with strictly-protected memory

Protected-memory multitasking for 6502 computer

Clock made of 512 Led's

Clock 512

Hackaday Prize 2020

This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!

The Cap That Doesn't Let You Touch Your Face!!!