Projects Daniel Nikolajsen likes and follows

Sort by:

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

phil-handley Phil Handley

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

Universal Arduino Wireless Shield

RadioShield

jan-grome Jan Gromeš

The 2018 Hackaday Prize

A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.

Visual Robotics Platform

The 2018 Hackaday Prize

Basically you can turn regular fishing line and nichrome wire into a linear actuator that can contract much like a human muscle.

Material Linear-Actuator for Robotics

Brandon T. Wood

Commander un relais iot avec ESP-01 via SmartThings

Relais ESP-01 iot sur SmartThings

erik-tellier Erik Tellier

A compact modular design of the strain wave gear for general robotic applications.

Compact Strain Wave Gear Actuator(s)

I made a simple antenna, used cheap TV Tuner and with such hardware controlled via some software I was able to pick satellite signals/images

Recieving the earth's photos from real satellites

Put your Verilog on real hardware, real cheap

FPGA Bootcamp #3

al-williams Al Williams

The 2018 Hackaday Prize

Using ninjaflex, I have revived a dead Phillips CD-i

3D printed belt for Phillips CD-i

The 2020 HDP Dream Teams are participating in a two month engineering sprint to address their nonprofit partner. Follow their journey here.

2020 HDP Dream Team: UCPLA

supplyframe-designlab Supplyframe DesignLab

Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.

Octoshield

goodwin GOODWIN

A workshop on IOT including a simple IOT device using Wemos D1, a DS18B20 temperature sensor, a battery shield and a rechargeable battery.

Simple IOT

radu-motisan Radu Motisan

We established this project in order to perform some Robotic skills. PICTO92 is a mobile line follower robot

Line Follower Robot (PICTO92)

diy-guy-chris DIY GUY Chris

A small board that measures temperature, humidity and pressure every hour for five years.

Low Power Environment Monitor / Logger

alnwlsn alnwlsn

A portable, rugged, self-contained system to suit all your RF SIGINT needs in every environment.

Raspberry Pi SDR Cyberdeck

tom-mladenov Tom Mladenov

In this project, I will build a desktop-sized MRI that is inexpensive and can be built by anyone.

Home Made MRI

yashiro yashiro

RTL-SDR dongle connected to a 137MHz V-dipole capable of receiving NOAA automatic picture transmissions and ISS broadcasts.

NOAA Automatic Picture Transmission RX

aditya-mukherjee Aditya Mukherjee

We are creating a system to automate the process of folding boxes

AutoFold the Box Folding Robot

A solution for not being able to see your beer in VR.

6DoF IoT WiFi-enabled Connected Smart Pint