Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Peter Balch likes and follows

104.5k
1,495.7k
2.4k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

261k
13.3k
609
Integration of cheap wireless Arduino sensor nodes with an awesome home automation platform called OpenHAB. Explore interface options.
Project Owner Contributor

$20 Wireless Arduino Home Automation w/ OpenHAB

eric-tsaiEric Tsai

38.5k
10.6k
25
How to power up and communicate with the cheap RCWL-0516 radar sensor module
Project Owner Contributor

First steps with the RCWL 0516 radar switch

ivorasivoras

15.5k
10.2k
54
Fully functional floor piano, with midi in/out, leds and training mode.
Project Owner Contributor

Cheap Expandable Floor Piano

fredericFrederic

8k
8k
47
Track and Trace anything with the Arduino AnyTracer of only 25 x 25 mm! It is the smallest, complete GPS GSM tracker in the entire world.
Project Owner Contributor

Arduino AnyTracer

addydejaddydej

6.8k
7.8k
62
The Arduino Nano Quick Project. Develop Everywhere.
Project Owner Contributor

Arduino Nano QP

alain-mauerAlain Mauer

25.1k
7k
247
Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.
Project Owner Contributor

Bobble-Bot

mike-mooreMike Moore

10.2k
6.8k
60
diy direct-drive extruder 3D printer running Klipper firmware
Project Owner Contributor

protoDEV 3d printer

michal-wojciechowskiMichal Wojciechowski

9.5k
6.4k
29
Is there room for another oscilloscope? Real Time nodejs/html5 Sci ToolBox! Arduino | Raspberry Pi | FPGA
Project Owner Contributor

GinScope | Science ToolBox | Oscilloscope

gintaras-valatkaGintaras Valatka

4k
4.1k
28
Developing my first hardware con talk in the open
Project Owner Contributor

Supercon talk: a pragmatic guide to motor controls

jonathan-beriJonathan Beri

3.7k
3.4k
4
A slightly unsafe journey into alternative fuels.
Project Owner Contributor

Run a small engine on WATER! Ends with a BANG!

thethriftstorehackerTheThriftstoreHacker

3.8k
3k
59
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project Owner Contributor

Open Exosuit for Differently Abled

alex-m-sunnyAlex M Sunny

2.1k
2.1k
24
In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol
Project Owner Contributor

Ultra low power WiFi home automation system

sylwesterSylwester

1.1k
1.9k
3
In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.
Project Owner Contributor

3D Print Time lapses Without Octoprint

setcreatesetCREATE

2.7k
1.8k
4
MQTT-enabled Numitron clock with Arduino and ESP8266
Project Owner Contributor

Numitron Clock

harri-ohra-ahoHarri Ohra-aho

1.8k
1.7k
11
Multi-Functional Custom Robotic Research Platform
Project Owner Contributor

PROJECT MOOBA

nebra-labsNEBRA Labs

1.6k
1.1k
2
You'll learn what is the finality of standalone Arduino and how it is applied in real projects.
Project Owner Contributor

Standalone Arduino Applied in Projects

silcios-labSilícios Lab

903
901
10
Large Humanoid Robot 150cm With lightweight plastic design and originally planned for walking
Project Owner Contributor

Large Humanoid Robot

kevinwangkevin_wang

55
440
4
Like the hello world of Hackaday, I'm building a clock.
Project Owner Contributor

Hello Double Bell Clock

andrew-cooneyAndrew Cooney

642
335
0
A small(er) Vortex Particle separator that can be easily 3D printed. Use with a 2" or 1.25" (adapters needed - can be printed) vacuum hose.
Project Owner Contributor

3D Printed Vortex Particle Separator for Shop Vac

aaron-pAaron P.