Projects wes likes and follows

Sort by:

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

I upgraded my cheap $154 3D printer into a high quality 3D printer with 3D printed parts which you can download for free.

Upgraded cheap 3D printer into a high quality

Mateo Miličević

The 2018 Hackaday Prize

printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation

3D Printed Strain Wave Gear

Johannes Hassler

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

The 2018 Hackaday Prize

Features of smart shoes: generates electricity, auto lacing, step counting, etc.

Smart Shoes

Shahid Jariwala

https://www.youtube.com/c/longtechnical More About LongTechnical » How to Program ATMEGA 8,16,328 Attiny and Fuse Bit Hi friends. Tod

HOW TO PROGRAM ATMEGA 8,16,328 ATTINY AND FUSE BIT

Cheap and DIY alternative to commercial security keys such as Yubikey using ST-Link V2 clone dongle

ST-Link V2 clone Security Key

132 APA102 LED panels, 680 pixels per panel, 90,000 pixels, 300sqft, 4 Spartan 6 Mojo FPGAs

HDMI to FPGA to APA102

Internet radio and BT speaker in a small form factor with minimalistic user interface

ESP32-based internet radio and bluetooth speaker

A Raspberry Pi internet world radio receiver

Raspberry Pi World Radio

Abraham Martinez Gracia

this is easy project with simple 8 blocks How to Build your Own Spectrum Analyzer software using GNU-RADIO Companion under Win10 easy !

Build Your Own Spectrum Analyzer GNU RADIO Win10

Small AVR-ISP Programmer

AVRFT234

Based on RCWL-0516 Microwave Doppler Radar Sensor and SIM800L GSM Module.

Security System

Anuradha Gunawardhana

Part of a professional RDS radio project

RDS FM radio

My goal is to design a 3D printed standalone speaker based on transmission line theory - info: Martin J. King - http://www.quarter-wave.com/

3D printed Bluetooth speakers - LittleJet!

Davide Ercolano

WiFi scanner able to scan 2.4G and 5G band and display WiFi devices in close proximity

5G Wi-Fi Scanner

SimonXi SimonXi

Breathing new life into a vintage Philco AM radio by turning into an entertainment system with Alexa and Raspberry Pi at the helm

Modernizing an Antique Radio

Via RYLR998 LoRa module and Arduino Nano, create a two-way radio (transceiver) w/ a 4x4 keypad to transmit and receive text messages.

Iron Man Walkie-Talkie (Two-Way Radio) w/ LoRa

Pin Badge and Keychain PCB version of Flux Capacitor with animated LEDs

Flux Capacitor Badge

Hojadurdy Durdygylyjov

As a beginner, this article helps you come up with various ideas on what you can start doing using your Raspberry Pi.

The best Raspberry Pi projects for beginners