Projects Erik Azar likes and follows

Sort by:

A radio controlled Nixie clock which also features a thermometer.

Radio controlled Nixie Clock

The 2016 Hackaday Prize

Selfmade watch that helps You learn STM32 programming.

nWatch

Peter Wasilewski

I programmed Tetris for the Arduino. It was a 2-Day Project. So it is not that big. But funny. The LCD Display is not made for this :-)

Tetris on Arduino + LCD

Program an Automation controller PAC using FORTH in Linux

May the FORTH be with Opto22 PAC and Linux

Absolutelyautomation

I needed a circuit to play a small audio sample loop. I made one using an Atmel, a resistor ladder DAC and an SPI flash memory

Partially-salvaged Arduino audio sample player

adria.junyent-ferre

The journey towards a tiny, battery operated, radio-capable push button for my openHAB system

Low-power stand-alone radio push-button

Charlie Charlie

Use the zymbit.connect software and Raspberry Pi to monitor and determine the health of refrigeration systems.

Save Energy with a Healthy Refrigerator

Automate the creation of a focus stack by controlling the photo camera and a linear actuator.

FoocusStacker

A hat to display audio frequencies.

Audio Visualizer Hat

AndyMac AndyMac

How I built a worm drive pan/tilt mount out of Lego

Lego Optics Lab: Worm Drive Pan/Tilt Mount

I've got a MeArm and I'm going to do science to it.

Hacking the MeArm

Commercialy available, partially assembled low cost motor driver (power stage only) for brushed DC motors

Massmind.org 40 V 18 A Output DC Motor Drive

Here comes my new robot FLEX i call it .. ) https://www.youtube.com/watch?v=xVuOzOeGwhA

FLEX my new robot part 1 and 2

The 2015 Hackaday Prize

GPS Equipped voice recorder based on audio codec module and gps breakout.

Geo-Tagging Voice Recorder

I've modified a card reader to play a tune.

Swipe Card Music Player

This is a kurde project of a bluetooth controled flamethrower

IBURN, an android controled flamethrower

Pierre CHARLIER

Household lights monitoring and control with not aditional wiring. This is an aproach to add IoT value to the old wall switches.

Lights off !

lots of lightbulbs

LOLB

A box to convert an amateur radio 70cm serial stream to telnet over WiFi.

70cm Serial WiFi Bridge

PICO-8 portable console using a Raspberry Pi Zero

PICO ZERO

VFD clock using opto-copplers as drivers and an arduino as the multiplexing controller

VFD clock with ESP8266 NTP sync