Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Leo88 likes and follows

104.5k
1,492.1k
2.4k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

62.7k
12.2k
292
An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.
Project Owner Contributor

OpenExposer

mario-lukasMario Lukas

13.3k
11.2k
27
This is an open source hardware, i made for use of build CNC printers.
Project Owner Contributor

Arduino CNC Shield

brijesh-sondarvaBrijesh Sondarva

15.5k
11.1k
23
Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost
Project Owner Contributor

Commercial home automation

ian-nortonIan Norton

12.1k
11k
25
Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.
Project Owner Contributor

CAN Diagnostics Logger with Arduino CAN shield

haydenhayden

10.7k
10.7k
39
Arduino Sudoku game made using 81 seven-segment displays!
Project Owner Contributor

Mega Sudoku

hari-wigunaHari Wiguna

7.9k
7.8k
63
Using a terminal from 1976 as home automation hub. Because we can.
Project Owner Contributor

ADM-3A Dumb Terminal Home Automation Hub

daniel-karpantschofDaniel Karpantschof

7.5k
7.4k
23
audio spectrum analyzer
Project Owner Contributor

AVR spectrum analyzer

crazychipCrazyChip

12.6k
7.1k
38
DIY DLP 3D Printer based on NanoDLP Software using Raspberry Pi 3 and Trinamic Motor Controller
Project Owner Contributor

ADAM DLP 3D Printer

adambrxadambrx

15.8k
7.1k
96
Resumer 3D is on Kickstarter now : https://kck.st/2xQmZYK
Project Owner Contributor

Magical box for Resuming 3D Prints automatically.

robertrobert

15.5k
6.4k
94
A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance
Project Owner Contributor

3D Printed Robot Joint with Active Compliance

tim-wilkinsonTim Wilkinson

6.3k
6.3k
40
A mixed reality shooting gallery using virtual reality tracking hardware.
Project Owner Contributor

Mixed Reality Room Scale Shooting Gallery

richard-hogbenRichard Hogben

9.9k
6.1k
49
Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!
Project Owner Contributor

LadyBug BEEFY: 3D printer motorized microscope

ahron-wayneAhron Wayne

16.1k
5.9k
75
An automated version of Petros Vrellis's knit art
Project Owner Contributor

Automate the art

shlonkinshlonkin

5.5k
5.5k
12
Given Windows with some version of Arduino installed, set the paths to allow using avr-gcc/etc from the command line.
Project Owner Contributor

install-avr-tools

westfwWestfW

28.2k
3.8k
26
Internet radio and BT speaker in a small form factor with minimalistic user interface
Project Owner Contributor

ESP32-based internet radio and bluetooth speaker

vedranVedran

14k
3.4k
37
Built from the microcontroller up using rs485 and 2 km of CAT6.
Project Owner Contributor

My fully custom home automation system

bernard-kerckenaereBernard Kerckenaere

6.2k
2.1k
17
A communication framework between ARM and PRUSS on BeagleBone Black
Project Owner Contributor

PRUSS support for newer kernels

shubhangi-guptaShubhangi Gupta

2k
2k
9
Design and build a high altitude balloon
Project Owner Contributor

High Altitude Balloon - Phonenix 1

joseph-turnerJoseph Turner

1.8k
1.8k
7
Weather Monitoring with Onion Omega, Its a powerful SBC. Comes with cloud connectivity, Ethernet, WiFi, uart , I2C & lot of GPIO.
Project Owner Contributor

Weather Monitoring Using Onion Omega and HIH7130

bhaskaranil430bhaskar.anil430

3.3k
1.7k
69
Morphing clock
Project Owner Contributor

GETULA

ekaggrat-singh-kalsiekaggrat singh kalsi