Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Gurianov_A likes and follows

94.6k
1,235k
2k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

47k
6.7k
87
A project about Home Automation. I want to replace my old thermostat with an IoT ESP8266 + OLED 128x64 Screen + OpenHab + MQTT + Micropython
Project Owner Contributor

Home automation: thermostat with ESP8266 & OpenHab

jorgeJorge

4.8k
4.8k
18
Open automation system, starting with lights and occupancy sensing and expanding to encompass anything that has wires or electrical contacts
Project Owner Contributor

Home Automation System (to rule them all!)

the-hatThe Hat

12.4k
4.6k
14
A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.
Project Owner Contributor

Monoprice Mini 3D Printer Bed Upgrade

dave-whiteDave White

3.1k
3.1k
23
Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.
Project Owner Contributor

3D Printed Chamfer Tool

alex-richAlex Rich

5.3k
2.7k
17
Project Owner Contributor

CAN Bus Arduino Clone

chrisChris

2.2k
2.3k
9
Regular sleep masks uncomfortable, let in too much light, or are otherwise just not cutting it? Why not make one yourself?!
Project Owner Contributor

More 3D Printed Molds: Custom Sleep Mask

joe-mJoe M.

1.8k
1.8k
13
Simplified AVR Prototyping with a breadboard-friendly breakout
Project Owner Contributor

T-Board: uc Prototyping

andrew-retallackAndrew Retallack

2.4k
1.5k
9
Using fast PWM capabilities of some AVR MCUs to make sounds using DDS.
Project Owner Contributor

sound_chip_AVR

ethan-durrantEthan Durrant

1.5k
1.5k
17
To celebrate 1000 subs on my YouTube Channel, I designed a custom YouTube Play Button.
Project Owner Contributor

Arduino YouTube Play Button

sean-hodginsSean Hodgins

1.4k
1.4k
18
Packet IR for AVR at 4800 baud, with less than 0.1% packet loss at 3 m.
Project Owner Contributor

Infrared serial link for AVR

bruce-landBruce Land

895
890
10
I am upgrading my prusai3 to a massive build volume during which I will also be adding peristaltic pumps, for printing batteries
Project Owner Contributor

3d Battery Printer

mechanicusMECHANICUS

889
885
2
AVR Simulator
Project Owner Contributor

BoardMicro

blake-w-fordBlake W. Ford

11.8k
725
28
Transmit on the license free Longwave band using your Arduino!
Project Owner Contributor

LowFER Transmitter for your Arduino

casey-halversonCasey Halverson

74k
587
177
The only thing worth doing, is the thing worth doing right!
Project Owner Contributor

DAV5 V3.01 Raman Spectrometer

david-h-haffner-srDavid H Haffner Sr

32.6k
335
143
A PCB mill inspired by open source CNC 3D printers with a custom design to fit standard size copper clad boards (6" x 4" / 160mm x 100mm)
Project Owner Contributor

Sub $200 PCB Mill that doesn't suck!

timo-birnscheinTimo Birnschein

8.7k
43
28
New cross slide, BLDC spindle motor, custom 32-bit grbl port, spindle sync, threading (G76), MPG controller+++
Project Owner Contributor

Mini Lathe (Emco Compact 5) CNC Conversion

terje-ioTerje Io

4.3k
7
5
Those <5$ calipers lack information about internals on the internet. I change that.
Project Owner Contributor

Cheapest Plastic Electronic Digital Caliper DRO

michael-skrepskyMichael Skrepsky

2.3k
6
6
2.4" Nextion Display on Holzmann ED300FD Lathe
Project Owner Contributor

Nextion DRO

java-jimjava-jim

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday