Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

Projects Ángel Cervera Claudio likes and follows

11.5k
4.4k
64
A robot to sail around the world alone
Project Owner Contributor

Ladon Project

Pierce NicholsPierce Nichols

7.1k
3.5k
37
I have made a new image processing software (LAPTouch) that can convert your conventional laptop or desktop screen into touchscreen
Project Owner Contributor

"Laptouch" Turn normal screen into touch screen

hanifalisohaghanifalisohag

39.5k
2.6k
88
The LittleArm is a 3D printed Arduino robot arm created for Makers and STEM education
Project Owner Contributor

LittleArm: 3D Printed Arduino Robot Arm

slantconceptsslantconcepts

11.7k
2.6k
56
A digital 24 hour clock using only relays and diodes for the counting logic.
Project Owner Contributor

Relay Logic Clock

Dave GönnerDave Gönner

1.5k
2.2k
8
START SWITCHING . . . !
Project Owner Contributor

Home Automation using Raspberry Pi ( IoT )

KumaravelKumaravel

457
2k
9
An object avoiding robot built with the DPT-Board+ and the DPT-Robot kit by university students and programmed in Javascript through WiFi
Project Owner Contributor

Object avoiding robot with DPT-Board

Daan PapeDaan Pape

2.4k
1.4k
3
This is my diy UPS hat that i use with my raspberry pi 3. It can power the raspberry up to 11 minuites when the micro usb power drops.
Project Owner Contributor

DIY Raspberry Pi UPS Hat (Up to 11min power)

Dimitris MatsoukasDimitris Matsoukas

191
1.2k
5
This is a cosplay replica I am working on. The end goal is to have it's own internals; power supply, display screen, arduino board, etc.
Project Owner Contributor

Pip Boy 3000

jontpetersjontpeters

961
1.2k
5
A Small Board with 2kb USB Micronucleus Bootloader Based on Attiny85 with USB Slot.
Project Owner Contributor

Arduino Tiny Relaisboard

SchuppSchupp

997
997
5
Fixing a broken scale with DIY hardware
Project Owner Contributor

DIY Body Scale

BenjaminBenjamin

248
832
0
Keeps your cards safe with a printable design
Project Owner Contributor

3D Printed Minimalist Wallet - Reloaded

Alex AndersonAlex Anderson

732
733
1
How I Assembled a Wheeled Telepresence Robot.” Endurance’s Technologies
Project Owner Contributor

The Start of the Project. Part 1.1.

George I FomitchevGeorge I Fomitchev

405
634
0
Raspberry Pi direct conversion receiver JSON receiver
Project Owner Contributor

Raspberry Pi IoT DC RX

Marcus BergMarcus Berg

86
628
0
I dream of being a pilot and knew about the drones i thought of making one and with the help of my parents i constructed one by my self
Project Owner Contributor

aeroplane drone model

hamisbabahamisbaba

6.1k
572
43
The idea is to create an accesible prosthetic hand that is commercially available in Colombia and doesn't use the classic string system.
Project Owner Contributor

TNS 1i

Giovanni LealGiovanni Leal

627
483
4
Mezzo allows your guests to understand which listening/seeing systems are in use in your house and opt-out if desired
Project Owner Contributor

Mezzo - informed consent for IoT

AKAAKA

411
346
5
Develop a low cost, open source, waste plastic extruder.
Project Owner Contributor

Recyclebot

MOSTMOST

35.3k
296
239
A mostly printed digital microscope powered by a Rasperry Pi Zero W
Project Owner Contributor

Pi Microscope

BraunsCNCBraunsCNC

1.4k
209
5
'The Sunflower' is an Arduino based solar tracker which will increase the efficiency of the solar panel while charging.
Project Owner Contributor

Sunflower - Arduino Solar Tracker

Naman ChauhanNaman Chauhan

181
208
3
Build like a Rockstar! Software continuous integration build status on a guitar fretboard. Updated for Circle CI compatibility
Project Owner Contributor

The FretBoard

Paul GallagherPaul Gallagher

4.4k
148
50
Sisyphish is based on the Sisyphus Table by Bruce Shapiro, but it incorporates water and Taiwan Bee Shrimp into the mix!
Project Owner Contributor

Sisyphish - A Kinetic Art Fish Tank

zachfrewzachfrew

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday