Projects Gus likes and follows

Sort by:

The 2017 Hackaday Prize

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Arcus-3D-C1 - Cable 3D printer

The 2017 Hackaday Prize

4x5 micro display with attiny85

Standalone LED micromatrix display

The 2018 Hackaday Prize

BT audio and hands-free interface between my car radio and my smartphone

Bluetooth audio with display (and maybe OBD)

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

Miguel Ayuso Parrilla

The Cyclone5 DE1-SoC has a nice audio codec, with support on the Intel/Altera Avalon bus. An Avalon bus master does the DSP, and runs codec

Audio DSP on DE1-SoC

The 2018 Hackaday Prize

Rover is a big four wheel drive 3D printed robot you can make at home. It's CC0 open source, so anyone can use it.

Rover V2 four wheel drive robot

Robotic arm controlled with mental push commands.

Humanoid robotic arm with EEG control

The 2018 Hackaday Prize

An open-source, 3D printed, high precision robotic arm with trainability

Dexter

Haddington Dynamics

Using ESP8266 to control my Airconditioner via WiFi

Just another ESP8266 Infrared Control Device

Welle is an innovative device that turns any surface into a smart interface and lets you control devices or softwares with touch and gesture

Welle - Turn Any Surface into a Smart Interface

Richard Mou Qingqi

2017 Xmas goal is to build a Polar Express layout and control it with a Raspberry Pi.

Raspberry Pi Polar Express

This kind of bus is made up of one programmable Master - ATmega8 and 3 ( max. possible 255 ) Slaves - ATtiny13 parallel connected to master.

3-Wire Bus

Getting Started with PADI IOT Stamp module from Pine64 | AT Commands

PADI IOT Stamp module from Pine64

Bikash Narayan Panda

The 2017 Hackaday Prize

IoT clock (NTP) with home monitoring data feed, using an ESP8266 NodeMCUv1 Wifi module, and Arduino Nano to drive the LED matrix

LED matrix clock with IoT data feed

Thanks to Fusion360 and 3D Printing I was able to modify an old TV stand to become a motorized turntable that I'll use for shooting video!

DIY Motorized Turntable from an old TV stand

Hackaday Prize 2019

I've been in a clock making sort of mood recently and I've seen tons of word clocks so I thought it was time to give it a try

Small Word Clock

sjm4306 sjm4306

A 3D printed fully mechanical 7 segment display. It can be used without any electronic at all, by turning a gear.

Peters 7-seg all mechanical display prototype 2

The fastest soldering ever

Soldering lightsaber

HDMI CEC to USB Keyboard adapter

CEC2Usb

2021 Hackaday Prize

Clickety-clackety goodness to display a decimal number

Mechanical 7-Segment Display

DIY heated bed for the Cetus 3D printer using resistive wire

Cetus 3D heated print bed

Lukas Koch aka Ast