Projects ap0l0 likes and follows

Sort by:

Vintage U.S. and Soviet Hardware come together in a Mission Control-style console that actually tracks satellites.

Keplermatik

The 2015 Hackaday Prize

An arduino based oscilloscope capable of ~150kS/s

small-scope

B3606 is a cheap MCU controlled power supply, I'm reverse engineering it and writing software to add serial port and more features.

Power Supply B3603 Alternative Firmware

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

it can be used in the special situations which normal humans should not close to, such the High radiation zone, the High infection area.

Infrared Matrix Password Input System with Arduino

PlatformIO is an open source ecosystem for IoT development (Cross-platform IDE and unified debugger. Remote testing and firmware updates)

PlatformIO

Tutorial on how to run Windows PC applications on Android mobile devices

Launch any Windows Software on Android

04K - 50K LUT. Kicad. Open source. Pin header 1.27mm. 92 IOs. Breadboard-compatible. Lots of optional GND.

Altera MAX10 Breakout Board

Make a low-cost rhythmic Holter with a communication in real-time of the electrocardiogram from patient to doctor.

Wireless ECG

Official Hackaday Prize Entry

A belt that tells you where to go using haptic feedback.

Wayfinder Belt

This project aims to substitute the low quality hub to control milight / easybulb or limitlessled clones.

canny: ESP8266 + nRF24l01 milight gateway

YAPSFrame is a Raspberry Pi based Smart Frame. Pulls photos from Windows Shares, rotates and scales. Also clock, soon weather and calendar

Yet Another (Raspberry) Pi Smart Frame

tklenke tklenke

ice40 FPGA based custom board to control eink display

FPGA eink controller

Hackaday Prize 2019

Spot trespassers with a neural network and transmit basic results via LoRa

LoRa + Neural Network Security System

Tegwyn☠Twmffat

USB MSD Bootloader for PIC Microcontrollers

USB μC - USB PIC Bootloader

The 2016 Hackaday Prize

Make a board to interface the Raspberry Pi with a surplus Kindle screen. The smaller and cheaper, the better

6 inch Pi E-ink display

Connect the project to your laptop or phone and then chat between the devices without internet or SMS using just LoRa. Serial terminal based

LoRa Messenger for two devices for distance up to

akarshagarwal98

I always wanted a large, affordable E-Ink screen to play around with. This board talks to cheap E-Reader replacement screens with an ESP32.

EPDiy: 9.7"/6" E-Paper controller

GETULA

ekaggrat singh kalsi

All the simplicity of the Arduino Uno plus extra I2C UART SPI ADC IO and PWM channels. A development board for the new ATmega328PB MCU.

Prestissimo Uno+: Uno w/ more I2C UART SPI ADC IO

What happens when you overlay LEDs with core memory?

Interactive Core Memory Shield Using LED Matrix