Projects pierrextardif likes and follows

Sort by:

Raspberry Pi Based Hardware Sampler / Synth Platform

SamplerBox 1

I use the Ada language on a STM32F4 to turn an old hard drive into a solenoid engine.

Software controlled solenoid engine

Fabien-Chouteau

The 2016 Hackaday Prize

This is a robot platform with stereo cameras and omniwheel drive. It can be connected to HMD (e.g., google cardboad, ocolus rift, ...)

Robot for telepresence and VR experiments

Ambient lighting using a Raspberry Pi and recycled monitors

Raspberry Pi Video Wall

An Arduino Zero compatible motor driver for robotics projects.

ZeroDriver

Mahesh Venkitachalam

In this Augmented Reality Face Tracking tutorial real persons face expressions are recognized and tracked. Accordingly virtual devil mask’s

Unity3D and Kinect for Face Tracking

Use your Raspberry Pi to "convert" your WiFi connection to wired. Use your old router as access point with Ad-Blocking.

Raspberry Pi route WiFi through Ethernet

Dimitris Matsoukas

The 2016 Hackaday Prize

The goal of this project is to create a standardized outdoor robotics platform, similar to the Turtlebot.

Open Rover

This project try get the dimensions about a deep foundation without a danger to the responsible for the excavation survey.

Deep Foundation Laser Scanner

Laio Athos Nevar Fonseca

The 2018 Hackaday Prize

This project will give you full gesture control of any virtual Hero you like with a simple set of inexpensive devices using sensors on RPi

Immersive VR on Rpi to control a Hero with sensors

Smart IoT postbox will keep you informed about new envelopes dropped inside a postbox by the mailman.

Smart IoT Postbox with the idIoTware Shield

Unofficial Badge of Talent Land 2018

The badge of the Lands

For Mirrorless and Mid-Size DSLRs.

Handheld Camera Gimbal

DNA inspired art-tech LED effects sculpture

Genoscope

The EVI is at-risk of becoming extinct. Explore the development of a DIY EVI Windcontroller for survival of this great instrument

DIY EVI-Style Windcontroller

Arduino based FM radio using the Nano and the modules: SSD1306 OLED , TEA5767 FM radio, LM386 audio amplifer and KA2284 Audio level.

Arduino FM radio

The 2018 Hackaday Prize

Simple Breakout Board with Winbond Flash Onboard connected SPI1, Pins for SPI-LCD on SPI2 to transfer ColorFonts and BigFonts between them.

Stm32f103 LCD Breakout

A dome of lights and cameras to produce high quality 3D scans

3D Scanning Dome

Benjamin Blundell

Connecting the TI CC3200 LaunchPad to WolkAbout IoT Platform

Connecting Bare Metal Device to the IoT Platform

WolkAbout Writer

The z-axis of my new Cetus 3D printer just plummets down when the power goes off. I want to fix that.

Cetus z axis fall stop

Lukas Koch aka Ast

An XLR Wall Box for home recording studios that uses CAT6A Cable for carrying audio signal.

Passive Ethernet XLR Wall Box

Arnaldo Pirrone