Projects Loopingstar likes and follows

Sort by:

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

A fully hardware debounced rotary encoder.

Hardware Debounced Rotary Encoder

A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance

3D Printed Robot Joint with Active Compliance

tim-wilkinson Tim Wilkinson

Cute heart shaped jewelry with programmable LED sequence.

Kawaii Hearts Pendant

natalia Natalia

You may see it's just a stickered chip? NO! This is totally self-contained "mod-chip"

Minimal and self-contained ATmega1284P "mod chip"

Working with RFID is so much fun, you can do alot with these tags like controlling relay, turing lights on off, access control, door lock

Arduino RFID Shield

bhaskaranil430 bhaskar.anil430

The 2018 Hackaday Prize

A drum machine, base synth and arpeggiator that fits in your pocket. User interface inspired by classic mod tracker software.

FATCAT: Altoids Tin Mod Tracker

Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.

3D Printed Chamfer Tool

alex-rich Alex Rich

From raw RF samples of the GPS L1 C/A signal to a position fix, in a completely open fashion

Full Stack GPS Receiver

Mike "Hamster" Field

This project has an esp8266 giving Wi-Fi functionality, LoRa module, 1.8 inch TFT display and buttons. You can make LoRa Remote or messenger

LoRa Remote Control Messenger With a 1.8" TFT

akarshagarwal98

A dumping place of experiments that I enjoy

PCB Art

jarrett Jarrett

The 2018 Hackaday Prize

Need a mini linear actuator that is easy to print and implement in your robotics DIY projects? We got you

3D printed mini linear actuator

giovanni-leal Giovanni Leal

Generic prototyping of processors from 1970's and 1980's

Generic 8-bit Processors Prototype (G8PP)

Always fascinated with the Enigma, I'm planning to fully model (Fusion 360) and 3D print a full-scale 3-rotor Enigma.

3D Printed Enigma Machine

An upgrade for ArduBlock

Barnabas Robotics ArduBlock Upgrade

grace-kull Grace Kull

Hackaday Prize 2019

For IT geeks, retro game fans, makers. Open source, portable, modular to explore, create, learn, code & play

ESPboy - RetroGaming&Software development MuliTool

Used for my MULE GATE, but could control anything needed with Secure2.0 Protocol and MYQ enabled.

CHAMBERLAIN (LIFTMASTER) GARAGE REMOTE

dave-conditt Dave Conditt

Restoring a classic bit of aviation history with a modern twist

Boeing 747-200 PMS/CDU Restoration

jeremy-gilbert Jeremy Gilbert

A collection of pictures detailing a classic project.

Class-A Headphone Amplifier

david-scholten David Scholten

Adafruit Adalogger M0 Autoranging DC voltmeter, 0 to 50 volts, built in test, proto area, tri-color led, photocell

Autoranging Voltmeter

duane-thompson Duane Thompson

Game engine using a virtual machine with a simulator and a web compiler

Esp little game engine