Projects t84 likes and follows

Sort by:

Open-source IoT platform

mqopen

Official Hackaday Prize Entry

A monster flashlight containing a 100W 8500Lm led with big heatsinks and batteries. With morse function to tell the night goodbye.

Portable 100W led flashlight

Yannick (Gigawipf)

Emulate Citroen's Lexia / Actia Diagnostics tool to query the CAN bus and log the results to SD card.

CAN Diagnostics Logger with Arduino CAN shield

Light CarPC-like Project to integrate the open source software NavIt into a Navigation System from Volkswagen

NavIt on a VW OEM Navigation System

Official Hackaday Prize Entry

Home security project based on atmega and ardunio. MQTT gateway for data gathering.

Home security

The 2015 Hackaday Prize

Simple function generator using an AVR, built from parts I have lying around

Function Generator

The 2015 Hackaday Prize

A printable robot arm, a little bigger than the usual hobby servo once.

3D Printable Robot Arm

Andreas Hoelldorfer

I programmed Tetris for the Arduino. It was a 2-Day Project. So it is not that big. But funny. The LCD Display is not made for this :-)

Tetris on Arduino + LCD

A 20 character retro-display word clock in 5 minute increments

Five minute clock

A way to legaly get rid of people blasting "wonderful" music trough bluetooth speakers. (Raspberry Pi 3A+/3B+ needed)

Stopping people play music via bluetooth speakers

Official Hackaday Prize Entry

The Tinusaur is a small board with ATtiny85 microcontroller and the minimum components to run properly plus shield headers and a battery

The Tinusaur

Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.

DIY Pick and Place

A robot for a personnal assistant : RORI

GLaDOs Replica for RORI

Hackaday Prize 2019

A fully open-source, mechanical, hot-swappable, RGB backlit, QMK powered, OLED screen featuring numpad/macropad.

YamPAD - Feature-packed open source macropad

A series of 3d printed hexagonal panels outfitted with a number of 24-bit neopixel LEDs provide the backdrop to my invention room.

esp8266 Futuristic Hex Wall

The 2016 Hackaday Prize

Simulation of WS2811/WS2812 LED strips in JavaScript

LEDstrip Browser Simulator

I came across a schematic of a reverse engineered 12V - 120V AC Power Inverter. So I started to make the "ONE BAD A$$ POWER INVERTER.

One Bad A$$ Power Inverter

Official Hackaday Prize Entry

This is an humidity and temperature sensor created using an Arduino Uno, a DHT11 sensor and the Ethernet shield to log data to a WEB Page.

Humidity and Temperature sensor with WEB log

Trying to document the development of my processes for small scale manufacture of Precision Piezo PCBs

Small scale SMD production

In this tutorial I am going to show you how to make a simple relay module that can be used in any project.

DIY - Relay Module

Robust yet simple and relatively cheap linear actuator for hobbyists !

Robust linear actuator