Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Rudolph likes and follows

6.2k
3.4k
59
The Arduino Nano Quick Project. Develop Everywhere.
Project Owner Contributor

Arduino Nano QP

Alain MauerAlain Mauer

3.9k
2.6k
75
Very small robots with features equivalent to their larger counterparts. For classrooms, robotics labs and more!
Project Owner Contributor

Micro Robots.

Joshua ElsdonJoshua Elsdon

2.5k
2.2k
34
This is a self balancing robot created by star wars fan, with autonomous behavior, FPV and remote control modes
Project Owner Contributor

Droid Trooper

Victor SerranoVictor Serrano

93.9k
1.6k
492
Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.
Project Owner Contributor

DIY hobby servos quadruped robot

Miguel Ayuso ParrillaMiguel Ayuso Parrilla

7.6k
1.3k
78
A 3d printed, motorized, and hackable telescope base with star-finding capabilities built on a raspberry pi zero.
Project Owner Contributor

pisolaris

Josh ColeJosh Cole

71.2k
902
573
An open-source, 3D printed, high precision robotic arm with trainability
Project Owner Contributor

Dexter

Haddington DynamicsHaddington Dynamics

31.1k
833
272
HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy
Project Owner Contributor

HeartyPatch: A single-lead ECG-HR patch with ESP32

Ashwin K WhitchurchAshwin K Whitchurch

4.1k
802
28
One Radio to rule them all Wifi, Bluetooth, nRF24l01p, CC2500, A7105, CYRF6936
Project Owner Contributor

Multiprotocol Radio

SpectreSpectre

14.4k
318
113
Pablo is a autonomous beach art rover. The point is to draw large drawings on the beach.
Project Owner Contributor

Pablo Odysseus

UlysseUlysse

11.5k
122
66
Open Source Reconfigurable Robot Arm for Learning STEM. Make It Your Way!
Project Owner Contributor

Mug-O-Matic: A Modular Tiny CNC

Michael GrahamMichael Graham

10.3k
58
38
DIY variant of ROS TurtleBot for <$250 capable of simultaneous location and mapping (SLAM)
Project Owner Contributor

Phoebe TurtleBot

RogerRoger

4.2k
57
48
Dual adjustable output Lab Power Supply (Linear and Switch mode combined) with micro ATX PSU
Project Owner Contributor

Triple Output Bench Power Supply (Linear, 2x SMPS)

Orkhan AmirAslanOrkhan AmirAslan

2.6k
53
50
An easy to build spider robot kit.
Project Owner Contributor

Kubik M0

deʃhipudeʃhipu

6.8k
45
56
Using an ESP32 and 'CNC' Stepper motors to power a LEGO Technic track vehicle.
Project Owner Contributor

'CNC' Stepper Motor powered LEGO Technic Tank

JasonJason

3.9k
37
38
A sand table project for the Milwaukee MakerFaire
Project Owner Contributor

The Spice Must Flow Sand Table

Mark RehorstMark Rehorst

4.4k
29
42
Dial indicators are common measuring instruments in the machine shop and are often referred to as clocks. Can they tell time too?
Project Owner Contributor

Dial Indicator Clock

vegipetevegipete

1.3k
18
19
Rose is a robot that can't stop dancing
Project Owner Contributor

Dance, Rose, Dance!

Jochen AltJochen Alt

2.1k
14
15
BT-1 was introduced in the Star Wars Darth Vader comic books as a twisted mirror version of R2-D2. BT-1 is the first and only Blastomech.
Project Owner Contributor

Star Wars: BT-1 the Blastomech

Kenneth ZabornyKenneth Zaborny

2.8k
11
16
Servo Socks are a case that snaps over a common, replaceable servo motor adding material to hack with. Cut, Carve, Sand and Drill them!
Project Owner Contributor

Servo Socks

Dan KitchenDan Kitchen

1.8k
10
16
An LM386 amplifier, in the least practical way possible.
Project Owner Contributor

Buggy LM386 Amplifier (Circuit Sculpture)

geocrashergeocrasher

278
6
14
A bit of rules abuse for one square inch contest
Project Owner Contributor

Larger than one square inch PCB breakout

jaromir.sukubajaromir.sukuba

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday