Projects romaindurocher likes and follows

Sort by:

The 2016 Hackaday Prize

This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).

A new high accuracy tilt sensor

A 7 segment display Arduino clock with RTC, alarm and brightness control.

Yet Another Arduino Clock

Breaking the encryption on the Lerdge series mainboards so I can try porting Marlin 2.0 to it.

Lerdge 3d Printer Mainboard Hacking

The 2016 Hackaday Prize

A super cheap decently resolving open source VIS-spectrophotometer. The cheapest in the OtterVIS line.

OtterVIS LGL spectrophotometer

Here we will establish a connection between the HC-05 ( connected to ATmega8 ) and an android Bluetooth app to blink a LED.

Interfacing HC-05 Bluetooth module with ATmega8

electronicsforgeeks

The 2016 Hackaday Prize

The system will use two cameras to track an object and provide a distance to the object of interest.

StereoVision Distance Measuring

The 2017 Hackaday Prize

Use GPG, a Raspberry Pi and a ESP8266 to safely store your passwords - soon with GnuPG Smart Card support

hardpass0.2: hardware passwd manager w/ smart card

Transfer images over Bluetooth between an Arduino and an Android phone.

Bluetooth Camera with Arduino UNO

The 2017 Hackaday Prize

Depth perception and obstacle detection glasses for the visually impaired using ultrasonic sensors and a binaural soundscape environment

SonicScape (Binaural Sensor Glasses for the Blind)

Pawit Kochakarn

A retrocomputer and CPU exerciser for classic 8-bit CPUs.

SDC_One

A board for two Raspberry Pi cameras (OV5674) placed as close to each other as possible

Dual camera board for OV5674

A quick, fun project with a few components and a few tools to eventually make a circuit that can be used on a DIY robot or on its own.

Obstacle Detection Circuit using BC547 w/ UTSOURCE

A 6 digit Nixie Tube Clock with RGB lighting

Nixie Tube Clock

The ultimate machine: There is something unspeakably sinister about a machine that does nothing—absolutely nothing—except switch itself off

The intelligent rebounced RCX switch

An esp8266 based binary city clock fork

Another City Clock

SATtiny is a solar Circuit Sculpture in a form of a satellite with blinking LEDs with optimized current consumption to last all night long.

SATtiny

The tree of life is a very popular wire sculpture, but this design is different since it has LED's to the end of branches to light it up.

Freeform tree of life with LED's

Sander van de Bor

wall-hanging sound and light sculpture

waldian

I built my own LED cube. The only difference from others is that it's spherical and has no circuit board.

Freeform LED Sphere

Electronic “paper crane”

Orizuru

A fun digital clock, featuring a 6 digit, RGB LED, 7 segment display. Built fully freeform style with brass wire!

BLINKATRON - Freeform clock with RGB display!