Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects theo.mammuth likes and follows

2.1k
2k
39
Reliable hardware designed by robots
Project Owner Contributor

SOL75 - a 3D customizer

francescoFrancesco

10.9k
1k
13
There are a lot of cheap audio bluetooth IC available in cheap these days. I got a bunch of them and here is my project.
Project Owner Contributor

I Made my own Audio Bluetooth module

electroboyElectroBoy

595
636
5
Arduino program to generate IR remote control ON/OFF toggle signal when lights are turned on, or periodically to clean the air in workshop.
Project Owner Contributor

Automated Jet Air Filtration Remote Control

rick-hardmanRick Hardman

27.6k
256
176
Design, development and build of an open-sourced SLS 3D Printer suitable for hobby users.
Project Owner Contributor

SLS4All - Affordable SLS 3D Printer

tomas-starekTomas Starek

8.6k
207
28
A lost art, that few can still use, and guard viciously as a company secret.
Project Owner Contributor

Universal Coil winding Machine

brettBrett

15.9k
181
85
High resolution Distance sensor for 3D printer Bed Leveling
Project Owner Contributor

Fast Bed leveling sensor

markmark

4.5k
69
72
An open-source manual pick and place machine for PCB artisans
Project Owner Contributor

Pixel Pump Pick & Place

robin-reiterRobin Reiter

11k
67
60
PCB linear motors offer a different approach to powering tiny scale model trains, cars, boats, etc.
Project Owner Contributor

PCB Linear Motors for Model Trains

martinMartin

6.8k
67
55
low power laser projector for AR glasses to display vector graphics
Project Owner Contributor

AR Glasses

joelJoel

4.6k
35
37
Desktop solder paste dispenser that works with disposable Co2 cartridges
Project Owner Contributor

Solderocket

nuri-erginerNuri Erginer

11.1k
31
23
This heater allows small machines such as the Elegoo mars to print with engineering resins like Siraya Tech BLU or specialty resins.
Project Owner Contributor

Chamber Heater For Small Resin Printers

grantGrant

21.1k
27
25
How much air assist is needed when working with a LED laser diode
Project Owner Contributor

Laser Air Assist Shootout

david-tuckerDavid Tucker

3.1k
24
15
This emulator allows communication with I2C devices by sending or receiving data to/from the I2C bus through a PC.
Project Owner Contributor

I2C Master Mode Emulator

dilshan-jayakodyDilshan Jayakody

2.7k
22
16
Custom Spot Welder machine based on MOT
Project Owner Contributor

Spot Welder

andyAndy

5.5k
17
23
Put aside your FPGAs and high performance oscilloscopes - Here's a two-chip solution to your reverse engineering needs
Project Owner Contributor

Dumping Firmware With a 555

jarrettJarrett

2.3k
14
14
Ultra simple Z-axis table design, good enough for focus automation for different materials.
Project Owner Contributor

Cheapest Possible Motorized Laser Z-Axis Table

timo-birnscheinTimo Birnschein

4.4k
14
14
A low cost laser bed for the MultiBot machine
Project Owner Contributor

MultiBot Laser Bed

david-tuckerDavid Tucker

4.2k
14
17
Ever wondered if your batteries are any good? I built a tester with data logging and tested every battery I could get my hands on.
Project Owner Contributor

Battery Analyzer MkII: Alkalines

moragorMoragor

1.1k
11
10
Building an AQI sensor with off-the-shelf parts and 3D-printed case
Project Owner Contributor

Portable Air Quality Sensor

costas-vavCostas Vav

2.8k
9
13
Handheld Thermometer for measuring high temperatures
Project Owner Contributor

Handheld Thermocouple Thermometer

cyb3rn0id@Cyb3rn0id

1.9k
5
7
Cooling FAN Controller Using an LM35 (No MCU)
Project Owner Contributor

Cooling FAN Controller Using an LM35 (No MCU)

hesammoshirihesam.moshiri

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday