Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

Projects eshill likes and follows

1.6k
671
24
Suspended Additive Layer Extrusion Manufacturing - 3D Printing extremely large multi-storey structures.
Project Owner Contributor

SALEM - Construction 3D Printing

jon.knuttonjon.knutton

1.3k
666
8
A "Nanodrone" for environmental data collection and a Ground Control PSoC6 to interface the data to the cloud.
Project Owner Contributor

Nanodrone For IoT Environmental Data Collection

Enrico MiglinoEnrico Miglino

794
548
8
A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.
Project Owner Contributor

3D Printed CNC

ElliotElliot

14.3k
330
51
All Sky meteorite camera build under 150$.
Project Owner Contributor

Cheap All Sky camera project with Raspberry Pi

jippo12jippo12

342
194
4
Remote control for Raspberry Pi GPIO peripherals
Project Owner Contributor

Remote RasPi GPIO control

Peter WalshPeter Walsh

28k
137
100
Ground Penetrating Radar using Arduino
Project Owner Contributor

GPRino

Mirel PaunMirel Paun

929
101
10
A dime-sized, ARM-based Arduino complete with a programming/development system.
Project Owner Contributor

Tiny Arduino for Hackers

doctekdoctek

433
95
8
A master clock source for the radio astronomy SDR DAS.
Project Owner Contributor

GPSDO Master Clock

Robert RouquetteRobert Rouquette

3.2k
59
39
Spending hours soldering perfboard has done my head in for years. Chad is the perfect solution, allowing quick PCB prototyping.
Project Owner Contributor

Chad, the Desktop CNC Mill

Sam GriffenSam Griffen

5.7k
42
42
A low cost 3D printed CNC that can be built with minimal tools yet is capable of great things.
Project Owner Contributor

MultiBot CNC v2

David TuckerDavid Tucker

3.4k
32
36
An acoustic phased array that is able to create images and videos from sound
Project Owner Contributor

Acoustic Camera

John DuffyJohn Duffy

5.3k
29
26
A GCODE compatible galvo laser cutter/engraver.
Project Owner Contributor

Galvo Laser Cutter/Engraver

Dominik MeffertDominik Meffert

163
23
2
This project uses a 3D Printed Speaker "Cone" and Coil Bobbin as an audio exciter
Project Owner Contributor

3D Printed Audio Exciter

TheMixedSignalTheMixedSignal

349
10
6
A Field Oriented Control Electronic Speed Controller for the Raspberry Pi!
Project Owner Contributor

FOCESCPI

Sina RoughaniSina Roughani

368
8
5
A small kiln with big expectations: Fusing PMC, Solder PCBs, Harden/Temper/Anneal/Carburize Steel, Pottery, Glass, Melting Precious Metals
Project Owner Contributor

Small Programmable Kiln

myburamybura

218
4
5
Based on JGJMatt's Instructable.
Project Owner Contributor

Ribbon Speaker

Jeremy g.Jeremy g.

330
4
6
I found a Roomba in an e-waste bin and decided to give it the gift of SLAM
Project Owner Contributor

Roomba 537 SLAM

PodgePodge

303
2
1
DIY customizable 0.96'' display voltmeter, ammeter combo
Project Owner Contributor

Small OLED panel meter

Marius TaciucMarius Taciuc

75
2
3
A fully digitally I2C-controlled input selector, pre-amplifier and tone controller based around the TDA7439.
Project Owner Contributor

Amplifier input select, pre-amp and tone control

Tijl SchepensTijl Schepens

221
2
1
USB 16bit Audio Interface with Headphone Amplifier
Project Owner Contributor

UADAC

michaelk99michaelk99

215
2
4
Small and precise thermal chamber based on TEC technology.
Project Owner Contributor

Micron-TEC

Andrey BykanovAndrey Bykanov

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday