Projects pagercam likes and follows

Sort by:

This is a demo project for my Bluetooth Low Energy Mesh Protocol using a simple nRF51822 based board

Bluetooth Low Energy Mesh Protocol

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Build log of a 450mm quadcopter AKA drone frame.

Hiro 450mm Quadcopter Build

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

The 2015 Hackaday Prize

A security camera with 70x optical, 2000x digital zoom, that will have a lot more features than most cameras.

MZ-1: Mega Zoom Security Camera - Revision 1

an open hardware security device featuring Atmel's TPM and CryptoAuthentication ICs

openTPM

The 2015 Hackaday Prize

In this tutorial real DBZ Songoku statue is tracked and various effects added on top of it.

Augmented Reality and Real 3D Object Tracking

The 2015 Hackaday Prize

... with video pass-through ...

DIY Augmented Reality Device

This Augmented reality Tutorial using Unity3D, Vuforia, Zigfu and Kinect Allows to Control Character with Your Body

Augmented Reality and Kinect - Control with Body

IRIS is yet another network radio based on Rasbperry Pi. This time with an alarm clock and some reading skills.

IRIS - network radio with alarm clock

An open hardware reading device

The Open Book Feather

The 2016 Hackaday Prize

My attempt at making an FPGA experimenters board in a popular form factor :)

'Flea Ohm' FPGA Project

Valentin Angelovski

The 2016 Hackaday Prize

The DIY laptop built entirely from PCB

ELLO 2M

Hackaday Prize 2019

University digital Logic Learning Xtensible board release 3 with SDRAM

ULX3S powerful ECP5 board for open source FPGA

FPGA Running RISC-V Core in a Game Boy form factor

2019 Hackaday Superconference Badge

Developing DIY, cheap, open-source pressure control ventilator (PCV) design to save millions of hospital and home pandemic patient lives

Pandemic Pressure Control Ventilator

Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.

TinyFPGA E-Series

'FleaFPGA Uno' Starter board

Valentin Angelovski

DIP40: Xilinx ZYNQ-7000, HDMI, USB, micro-SD, 32MB LPDRR2, 16MB Flash

Soft Propeller +HDMI +USB

Cheapskate version of Adafruit Feather M0

Fluff M0

An ECP5 FPGA and a FT60x FIFO USB 3.0 bridge. Useful for high speed data transfers to external hardware.

Kilsyth: ECP5 FPGA and a USB 3.0 FIFO bridge

Konrad Beckmann