Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

All Projects

 
4.3k
50
40
A mist-based tower system for growing leafy green vegetables
Project Owner Contributor

The Little Green Tower

Chris JohnsonChris Johnson

896
17
16
Cool Information Relay Circular Lamp and Entertainment System a W2812b based circular LED Display to show different data
Project Owner Contributor

CIRCLE - LED Display

Hackspace Schwerin e.V.Hackspace Schwerin e.V.

4.2k
93
67
An open telecommunicator device, independant from SIM CARDS and Telecom providers. On BT,868, 430 and 905 Mhz + ESP32
Project Owner Contributor

The LoraWan Pager

pcadicpcadic

1.6k
12
20
In old PCB's i found a low-capacity FPGA(CPLD) - EPM7064. I decided to make a small evaluation board.
Project Owner Contributor

The FPGA evaluation board - Frankenstein

AlexAlex

305.8k
1.3k
954
Pi Zero-based open-source mobile phone (that you can assemble for 50$ in parts)
Project Owner Contributor

ZeroPhone - a Raspberry Pi smartphone

ArsenijsArsenijs

1.8k
9
12
Shine your shoes with leds.
Project Owner Contributor

Sparkle shoes

GerbenGerben

82
11
10
There's some through hole & surface mount soldering to be done, but when you're finished you've got a sparkly eyed Hackaday head lapel pin.
Project Owner Contributor

Hackaday Blinky LED Badge

BenchoffBenchoff

12.8k
186
120
The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.
Project Owner Contributor

ESP32 WiPhone

stupidstupid

1.3k
42
29
A high torque, high precision, Strain Wave Gear (harmonic drive) based 3D printable closed loop servo actuator for use in robotic arms
Project Owner Contributor

Open HD

Sam ArmstrongSam Armstrong

1.7k
24
11
DIY variant of ROS TurtleBot for <$250 capable of simultaneous location and mapping (SLAM)
Project Owner Contributor

Phoebe TurtleBot

RogerRoger

119
10
9
I was bored with synthesizers, but still wanted to make electronic music. So I build a lot of techno music robots!
Project Owner Contributor

Making Techno with Music Robots

Moritz Simon GeistMoritz Simon Geist

1.6k
710
17
A wooden toy piano converted into a standalone digital synthesiser.
Project Owner Contributor

Vintage Toy Synthesiser

Liam LaceyLiam Lacey

177k
930
668
Building an HMD with no special parts, to make work easier and safer
Project Owner Contributor

Arduino Glasses a HMD for Multimeter

Alain MauerAlain Mauer

27.3k
322
155
Affordable and open-source LIDAR based on 3x VL53L0X ranging sensor
Project Owner Contributor

xLIDAR

JRodrigoJRodrigo

401
15
13
raspberry pi controlled ws2812 strip behind boxes, tiny webserver and script to show what's where
Project Owner Contributor

box guide

davedarkodavedarko

17.2k
230
153
AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25
Project Owner Contributor

Compact, $25 spectrometer

Kris WinerKris Winer

19k
293
217
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

Paul GouldPaul Gould

6.5k
127
68
! a platform for sensing and indicating human arousal !
Project Owner Contributor

SHE BON

Sarah PetkusSarah Petkus

872
13
14
Open Source Speaker made from a PCB
Project Owner Contributor

PCB Speaker

Carl BugejaCarl Bugeja

104k
1.3k
410
OpenSource 3D printable Robotic Arm
Project Owner Contributor

Thor

AngelLMAngelLM

2.2k
93
25
A Wearable, "Smart", Internet of Things Development Board That Learns
Project Owner Contributor

BodiHub

Dave NghiemDave Nghiem

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2018 Hackaday