Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

All Projects

 
4.4k
100
73
An open telecommunicator device, independant from SIM CARDS and Telecom providers. On BT,868, 430 and 905 Mhz + ESP32
Project Owner Contributor

The LoraWan Pager

pcadicpcadic

4.4k
54
43
A mist-based tower system for growing leafy green vegetables
Project Owner Contributor

The Little Green Tower

Chris JohnsonChris Johnson

954
18
20
Cool Information Relay Circular Lamp and Entertainment System a W2812b based circular LED Display to show different data
Project Owner Contributor

CIRCLE - LED Display

Hackspace Schwerin e.V.Hackspace Schwerin e.V.

1.9k
11
16
Shine your shoes with leds.
Project Owner Contributor

Sparkle shoes

GerbenGerben

13k
192
126
The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.
Project Owner Contributor

ESP32 WiPhone

stupidstupid

1.7k
12
20
In old PCB's i found a low-capacity FPGA(CPLD) - EPM7064. I decided to make a small evaluation board.
Project Owner Contributor

The FPGA evaluation board - Frankenstein

AlexAlex

27.6k
328
159
Affordable and open-source LIDAR based on 3x VL53L0X ranging sensor
Project Owner Contributor

xLIDAR

JRodrigoJRodrigo

95
13
11
There's some through hole & surface mount soldering to be done, but when you're finished you've got a sparkly eyed Hackaday head lapel pin.
Project Owner Contributor

Hackaday Blinky LED Badge

BenchoffBenchoff

177.3k
935
672
Building an HMD with no special parts, to make work easier and safer
Project Owner Contributor

Arduino Glasses a HMD for Multimeter

Alain MauerAlain Mauer

306.1k
1.3k
956
Pi Zero-based open-source mobile phone (that you can assemble for 50$ in parts)
Project Owner Contributor

ZeroPhone - a Raspberry Pi smartphone

ArsenijsArsenijs

17.9k
235
156
AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25
Project Owner Contributor

Compact, $25 spectrometer

Kris WinerKris Winer

193.7k
3.2k
1.3k
Python-powered machine vision modules
Project Owner Contributor

OpenMV

i.abdalkaderi.abdalkader

1.6k
710
18
A wooden toy piano converted into a standalone digital synthesiser.
Project Owner Contributor

Vintage Toy Synthesiser

Liam LaceyLiam Lacey

1.8k
25
11
DIY variant of ROS TurtleBot for <$250 capable of simultaneous location and mapping (SLAM)
Project Owner Contributor

Phoebe TurtleBot

RogerRoger

926
13
15
Open Source Speaker made from a PCB
Project Owner Contributor

PCB Speaker

Carl BugejaCarl Bugeja

134.7k
1.4k
817
A mirror which displays applications, other useful information
Project Owner Contributor

Raspberry Pi Smart Mirror

Hacker HouseHacker House

14.5k
555
130
3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer
Project Owner Contributor

Arcus-3D-C1 - Cable 3D printer

Daren SchwenkeDaren Schwenke

4.2k
60
49
A hardware kit to experiment with inflatable and vacuum based soft robotics.
Project Owner Contributor

Programmable Air

Amitabh ShrivastavaAmitabh Shrivastava

19k
295
219
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

Paul GouldPaul Gould

6.6k
128
68
! a platform for sensing and indicating human arousal !
Project Owner Contributor

SHE BON

Sarah PetkusSarah Petkus

10.5k
133
113
A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output
Project Owner Contributor

Tiny Solar Energy Module (TSEM)

Jasper SikkenJasper Sikken

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2018 Hackaday