Close

Recent Projects

It's about recreating a small and updated version of the legendary 2-player trackball arcade game "TEHKAN WC". Fun before, during and after
Project Owner Contributor

MINI ARCADE TEHKAN WORLD CUP WITH TRACKBALLS 2P

srblondeSrBlonde

Documented Blink sketches for my YouTube Videos.
Project Owner Contributor

Blink Sketches for the ATTiny10-LED from CanHobby

canhobbycaCanHobby.ca

Built a maze solver bot using Wall Following Algorithm, integrated with PID for positional adjustments and Boolean logic for wall detection.
Project Owner Contributor

Micromouse

akash-a-sakash a s

Decapping using hardware store available materials and relatively safe procedure
Project Owner Contributor

Safe IC decapping while preserving bond wires

100dollarhacker100dollarhacker

ESP32 Based GPS Navigator with OSM offline maps.
Project Owner Contributor

IceNav

jordi-gauchaJordi Gauchía

Reverse-engineering a bat-shaped, hot-swappable keyboard with a 38mm trackball and RGB-backlit encoder.
Project Owner Contributor

WK-50 Trackball Keyboard

kelvinakelvinA

Break the code
Project Owner Contributor

Electronic Mastermind

roni-bandiniRoni Bandini

Create awesome e-paper dashboards within minutes! Modularity? Check! Python3? Check? Works on Raspberry Pi Zero W? Check!
Project Owner Contributor

Inkycal - Your own E-Paper Dashboard

aceAce

Polyphonic Piano Accordion made from a cheap Melodica, some buttons and an ESP32 microcontroller
Project Owner Contributor

Arduino (ESP32) Standalone Accordion

bruno-campidelliBruno Campidelli

This is certainly the simplest and cheapest object detection system that can serve perfectly for the presentation
Project Owner Contributor

Simple ESP32 CAM Object detection using Open CV

mircemkmircemk

A very minimalist handheld console powered by ATTiny10 MCU, featuring 10x7 vintage LED display
Project Owner Contributor

EMES - Epic Minimalist Entertainment System

michaelMichael

Waste plastic turned into raw material for 3D printing.
Project Owner Contributor

My machinery 2021: Direct Granules Extruder

norbert-heinzNorbert Heinz

The MX1508 motor driver module is a small, low-cost module used to control DC motors and small stepper motors. It is based on the MX1508 IC,
Project Owner Contributor

MX1508 motor driver module

electronicsworkshopselectronicsworkshops

Retro computer built from TTL, with 6502 and Z80 instruction set. Includes video, sound and filesystem. No microprocessor or FPGA.
Project Owner Contributor

Isetta TTL computer

roelhroelh

A solar powered handheld doodad to explore the binary.
Project Owner Contributor

Tiny Bit Machine

g0730ng0730n

Electronics, Physics, Math... Tricks/musings I haven't seen elsewhere.
Project Owner Contributor

Random Tricks and Musings

eric-hertzEric Hertz

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday