15 Projects tagged with "cable"

Browse by tag:

Sort by: From:

A maker friendly capstan based BLDC driven quadrupedal robot kit.

Stanley - the capstan based quadruped kit

It's a very simple guide to recycle components to build a raspberry pi b+ AV out component.

DIY Raspberry Pi b+ AV Out

Martin Ferreira

3D printed ball and socket joint with a quarter turn twist lock at each joint. Brick shithouse goosenecks!

Locking ball and socket gooseneck system

A quickly hacked together thermometer I built for a farmer to check the temp. in >1m depth in a huge pile of compost.

Weatherproof extra long puncture thermometer

Monitors your ISP connection and power cycles the modem when the connection goes down.

ISP Modem Monitor - Shaw Eyes

The 2017 Hackaday Prize

This six axis robot arm is controlled by hand with 6 slide controls. It is an experimental project to research movements and for challenges.

Cable Six Axis Robotic Arm

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

The 2018 Hackaday Prize

A printable quick connect for 2 wire cabling.

Printable Quick connect

A hand-cranked reel for managing the Vive sync cable in a portable VR setup

Vive Lighthouse Sync Cable Reel

Hackaday Prize 2019

Small and powerfull controlling unit powerd from USB-C-PD

USB-C-PD Soldering Pen for Weller RT Tips

Thomas Leputsch

Using an EMP to trigger a separate electronic.

EMP using standard plug

An inexpensive programming cable pin-compatible with the Tag-Connect 6-pin footprint

Tagless programmer

Universal cable tester shield for Arduino UNO

Arduwire UNO (Low Voltage Cable Tester)

A simple, inexpensive 12 & 24 Volt DC nominal cable system.

DC Power Cables

William William

A cable-cam-inspired robot to fly a witch, or other lightweight ghoul, over unwary tricksters.

Witch-on-a-Wire Cable Bot