32 Projects tagged with "robotic arm"

Browse by Tag:

Sort by: From:

Niryo One is an Open-Source and accessible robotic arm

Niryo One

The 2018 Hackaday Prize

An open-source, 3D printed, high precision robotic arm with trainability

Dexter

Haddington Dynamics

Faze4 is 3d printable 6 axis robotic arm . It uses stepper motors and 3d printed cycloidal reducers.

Faze4 Robotic arm

Evezor is an open source SCARA class robotic manufacturing platform.

Evezor Robotic Arm

The 2018 Hackaday Prize

The idea is to create a non convencional interface to control a robotic arm

Owi arm controlled by a LEAP Motion

Hackaday Prize 2019

A open-source robotic arm using PC with ROS，stm32+CAN bus.

Open-Source robotic arm Abot

An Arduino controlled robotic arm with a USB microscope using the Arduino YUN and uFactory robotic arm.

Armed Microscope

Each servo has its own 2A separate power supply ensured by multiple DC-DC convertors in one mini shield.

XBee controlled Robotic Arm

I got this big robotic arm, filthy and rusty, with no controller. This project is about bringing it back to life and build a controller.

Reviving Scorbot

This project aims at creating a low-cost open source robotic arm for lab automation

FirePick mod for microplates

In this project I am building an Arduino based robotic arm with 4 DOF (Degree of Freedom).

Arduino Based Robotic Arm

sm_hasanuzzaman

The 2017 Hackaday Prize

Driving a couple of stepper motors with a FRDM-KL25Z MCU (i have lately switched to K46f + wireless control (joystick))

Robotic Arm Project

madivak madivak

A 6 degrees of freedom robotic prosthetic arm

Robotic Prosthetic Arm

Make a robot arm to be a 3D printer and soldering helper and other helper.

Make a Arduino-based Multi-function robotic arm

Using Blender to control a physical robotic arm over serial port

Controlling a robot arm with Blender

Alvaro Ferrán Cifuentes

robotic arm using house hold materials.cheap and best.

Mini Robotic Arm

I've build a printbot (3d printable robot)

Robotic Arm with Freecad

Create an alternative firmware for the WingXine ASME-03 series high torque servos

WingXine ASME-03 alternative firmware

Thor+ will get a little brother

THOR+ JUNIOR ROBOTIC ARM

dannyvandenheuvel

The challenge: Making a Robotic arm entirely out of recycled materials. The Result: see for yourself + bonus tutorial

Robotic Arm from Recycled Materials

The 2017 Hackaday Prize

An open design robotic arm, made with dc motors, 5 degrees of freedom, can pick up 5 Kg at 1.50 m and with the lowest cost posible

DIMER MKII, Large open robotic arm

Antonio Regueira