0%

0%

r.cimini

I'm an Electronic Engeneer.

Abruzzo-Italy

Following Follow me

Similar accounts worth following

This user joined on 09/08/2020.

Projects I Like & Follow

Hackaday Prize 2019

Portable Power Platform for Pi Zero

PiSugar Battery for Raspberry Pi zero

Mostly 3D printer Rasppberry Pi 3D Scanner Rig

Raspberry Pi Zero 3D Scanner

vojislav-milanovic Vojislav Milanovic

A Raspberry Pi internet world radio receiver

Raspberry Pi World Radio

abraham-martinez-gracia Abraham Martinez Gracia

Implement the fantastic robotic packages offered by the TurtleBot3 robot on a budget without sacrificing features and performances.

Build your own TurtleBot 3 backbone

Hackaday Prize 2020

A disaster-resilient communications network powered by the sun

Disaster Radio - LoRa Mesh

Fully open source remote control for common electric skateboards using the NRF24L01+

Open esk8 Remote - v1

timo-birnschein Timo Birnschein

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

Super IMU

laetitia-bel Laetitia BEL

The 2018 Hackaday Prize

Uses multiple Arduino Nano and a passive mixer to generate multiple voices simultaneously.

Rachel's Nightmare, a distributed polyphonic synth

arduino-enigma Arduino Enigma

A small autonomous robot which will “see” and follow the line and take decision when it sees a turn by itself.

Simple Line Follower using Arduino

jithin-sanal Jithin Sanal

An upgrade for ArduBlock

Barnabas Robotics ArduBlock Upgrade

grace-kull Grace Kull

Hackaday Prize 2019

An Arduino-based USB keyboard simulator which injects keystrokes via Bluetooth protocol or predefined payloads in SD card

Arduino USB Keystroke Injector (Arduino BadUSB)

amirreza-nasiri Amirreza Nasiri

Security is a major concern so we have designed a door alarm system to recognize the presence of anybody at the door

Door Alarm using Arduino

hiotron hIOTron

This project is about building your own stopwatch using the Arduino board and a few other components.

Arduino Stopwatch

hiotron hIOTron

A dual channel RS232 adapter for my FPGA board. It works @ 3.3V or 5V, and may be it can be useful for others things too...

Dual channel RS232 adapter

Build multi-sensor pods that can be placed around the home and easily programmed through an app.

Customizable IoT In-Home Sensors

tyler-moroso Tyler Moroso

2021 Hackaday Prize

180 Tie point solderable breadboard for electronics. 60mm x 70mm

Turtle Prototyping Solder Board

View all

Bits