0%

0%

rahmaevao

engineer

Russia

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/12/2018.

My Projects

In this project, I tried to deal with the BMS communication protocol, which is compatible with the JBDTool program.

JBD BMS protocol

Create your battery and forget about balancers and BMS.

Programmable modular battery

This is laboratory electronic load for testing batteryes or power suplyes

Programable modular electronic load

Projects I Like & Follow

Reverse engineer, reprogram or otherwise use the UV/OV/balancing circuits built into each of the 16 modules in a Tesla Model S battery pack.

Model S BMS hacking

The 2015 Hackaday Prize

Switchable 5V and 3.3V power from a AA, using an efficient boost regulator

BooSTick - small AA voltage booster

The 2017 Hackaday Prize

Using NIR (near infrared) Illumination and real-time image processing, we can make the veins more visible!

Assistance System for Vein Detection

Myrijam Myrijam

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

Bring SailfishOS and Nemo Mobile operating systems to Raspberry Pi 2

SailPi

Aleksi Suomalainen

Working, polymer-based organic light emitting diodes

Homemade OLEDs

The 2016 Hackaday Prize

Designing hardware is difficult. We want to create a innovative design tool which can design a complex hardware design in 60 seconds.

Simplify Embedded hardware designs

Makarand Kapoor

In this project we show how we made a single-lead ECG monitor for heart-rate variability using the MAX30003 and an Arduino Uno.

Single-lead ECG & heartrate variability monitor

Ashwin K Whitchurch

Easily connect several 7-Segment displays using a single wire to your microcontroller.

Addressable 7-Segment Displays

Using a 1979 Ariens chassis, but replacing the small engine with a DC motor

Electric Snowblower Conversion

The 2016 Hackaday Prize

It will electronically keep insulin cool by means of a battery, microcontroller, and peltier device.

Portable Insulin Pen/Bottle Cooler

A self sustained 3 to 12S lithium ion battery management system based on the STM32F303 and the LTC6803-2

DieBieMS - A 3 to 12S Battery management system

Raspberry pi/teensy controlled line follower using a pre-made chassis.

Dagu rover line sensing robot

Enhance your RetroPie console and play PC games on Raspberry Pi

Gaming Beyond RetroPie

The 2018 Hackaday Prize

An open source modular system for learning, development and games.

DevBoy

Nicolai Shlapunov

Based on the design of the Parrot Jumping Sumo Robot but militarized to allow for higher jumps and most importantly multiple jump heights

Jumping Search-and-Rescue Robot

The 2018 Hackaday Prize

DIY 3D Printer (not) only for printing clay

Open Hardware 3D Printer

Inexpensive Home Automation & Monitoring

CasaSee

View all

Bits