0%

0%

TheFulcrum15

Mechanical Engineer with experience in coding and basic electronics.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/13/2021.

Projects I Like & Follow

Budget Electric go kart build that focuses on functionality and design

E-Kart: The electric Go Kart

adrian-georgescu Adrian Georgescu

The 2018 Hackaday Prize

Make & 3D print your own phone with sensors, displays, electronics, batteries and antennas. Customize Android and do exactly your thing!

Kite : Open Hardware Android Smartphone

shree-kumar Shree Kumar

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

The 2017 Hackaday Prize

Miniature VT100 with all the bells and whistles

diy-VT100 - A Miniature hardware terminal

kuldeep-singh-dhaka Kuldeep Singh Dhaka

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

The 2016 Hackaday Prize

Hooking up a DIY spectrometer to professional spectroscopy software

Universal software for DIY spectrometers

friedrich-menges Friedrich Menges

The 2017 Hackaday Prize

Philips Hue is nice but expensive... now there is a cheaper way.

DIY Complete Philips Hue Home Automation

mariusmotea marius.motea

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.

SmoothControl

matthew-moore Matthew Moore

Project of metal 3D-printer for printing unique metal parts, by using welding wire, induction heating and other physics)))

Metal 3D-printer based on induction heating...

sergey-r Sergey R.

The 2018 Hackaday Prize

BT audio and hands-free interface between my car radio and my smartphone

Bluetooth audio with display (and maybe OBD)

Programming DJI Tello using GoBot

Flying DJI Tello with GO Programming Language

Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.

Internet Accessible Home Automation with Sonoff

clay-graham Clay Graham

An electronics design tool for capturing current profiles of battery powered devices and optimizing battery life for your IOT projects

BattLab-One - Battery Optimization Hardware

bluebird-labs-doug-peters Bluebird Labs Doug Peters

A simple semiconductor current/voltage trace plotter. It requires only an Arduino and a handful of passive components.

Rodriguez - The World's Slowest IV Tracer

joseph-eoff Joseph Eoff

Hardware debouncing board and gamepad firmware for cheap nrf51822 modules.

Bluetooth Arcade Controller

ozan-altinkaya Ozan ALTINKAYA

View all

Bits