0%

0%

rich

Unbelievably good.

Tx

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/10/2015.

Projects I Like & Follow

IP over 430MHz Ham Radio, 50 to 500kbps, 20W RF. Extension for HSMM-Hamnet-AREDN. 100% open-source.

NPR New Packet Radio

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

turo-heikkinen Turo Heikkinen

The 2017 Hackaday Prize

An outside pole mounted aerial picks up 4G signals which are then filtered, amplified and re-transmitted through a second inside aerial.

Cell Phone 4G LTE Repeater / Booster / Femtocell

capt-flatus-oflaherty Capt. Flatus O'Flaherty ☠

The 2017 Hackaday Prize

Open Source CAN Bus Based Servo Stepper for Multi Axis Gang Control

AnanasStepper 2.0 - 3.0

Hackaday Prize 2019

It's cheap, doesn't use a specialized heart rate AFE and can blink LEDs with your pulse :)

uECG - small open source wireless ECG sensor

ultimate-robotics Ultimate Robotics

The 2017 Hackaday Prize

HeartyPatch is a fully open-source, IoT connected, BLE enabled heart-rate variability & ECG patch with great accuracy

HeartyPatch: A single-lead ECG-HR patch with ESP32

ashwin-k-whitchurch Ashwin K Whitchurch

The 2017 Hackaday Prize

A USB-flash sized GSM/GPS tracker with a wide array of features

USB TinyTracker

The 2017 Hackaday Prize

This project focuses on using building a budget powder bed 3d printer capable of printing bones, and creating the needed ink and powder.

Printing bones on a DIY powder bed 3d printer

ice40 FPGA based custom board to control eink display

FPGA eink controller

The 2018 Hackaday Prize

Robot on a PCI-e Stick (ROPS) is a project to provide a flexible I/O solution for ROS robots.

ROPS

The 2017 Hackaday Prize

A set of senors and actuators that make composting simple.

The Compost Professor - A Smart Composting System

darian-johnson Darian Johnson

The 2017 Hackaday Prize

Always wanted to have Msps ADCs on a Raspberry ... Let's dig into it.

20Msps+ ADC RaspberryPi HAT

kelu124 kelu124

3D Printer using upcycled CD drives, hard drives, and an ATX power supply.

Poor Man's Mini 3D Printer

AccidentalRebel

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

The 2017 Hackaday Prize

An ultra strong and fast servo that is reasonably priced. The goal is to generate 60ft*lbs (11 520oz*in) with 60 rpm no load rpm speed.

Ultra Servo

The 2018 Hackaday Prize

A convenient adapter to view the electrical grid waveform through your PC's sound card.

Grid-2-Audio

david-scholten David Scholten

How an Attiny85 self-regulates its cheap power supply.

A Cheap And Dangerous Garden Light Boost Converter

randy-elwin Randy Elwin

DIY 2,5" x 2,5" NaI(Tl) gamma spectroscopy probe

2,5" x 2,5" NaI(Tl) gamma spectroscopy probe

View all

Bits

Randy Elwin wrote 04/21/2019 at 17:12

Thank you for liking my project!

Are you sure? yes | no

GrayPillow wrote 05/13/2017 at 01:47

Thanks for following AnanasStepper 2.0!!!

Are you sure? yes | no

Patrick Van Oosterwijck wrote 05/12/2016 at 17:05

Thank you for following my #LiFePO4wered/Pi project!

Are you sure? yes | no

marcin wrote 08/30/2015 at 00:09

Thanks.

Are you sure? yes | no