0%

0%

Robert Tucker

Retired engineer

Tulsa, OK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 12/13/2021.

Projects I Like & Follow

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

Creating a break-out board for the ATtiny1616 where sketches can be uploaded from Arduino with the Arduino UNO or a modified AVR JTAG ICE

ATtiny 1-series with Arduino support

Sander van de Bor

The 2018 Hackaday Prize

This is a fast, heavy-duty Pulse Engine derived from my Commercial grade desulfator. Up to 80% battery yields overnight.

Battery Desulfator Kit, TESLA 12V compatible

Sofware usb host for connecting mouse , keyboard and joystick to ESP32

ESP32 usb software host

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

Benjamin Prescher

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

Hackaday Prize 2019

Loko is the 12 gram GPS tracker with extreme battery life.

Loko-the Tiniest GPS tracker with 270 days battery

Hackaday Prize 2020

Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.

Open Sky Anchor WiFi Drone Brings The GIG

Tomographic scanner using my X-Ray machine, a simple motor to rotate the object and a reconstruction software

X-Ray CT Scanner

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

Building and tinkering with crystal radios goes back to my childhood of the late 1960's and coming round again.

Shortwave Crystal Radio - A blast from my past

Hackaday Prize 2020

1/6 scale WWII Hetzer. Radio Control, scratch built, drone camera, paintball gun cannon, drive is a pair of electric bicycle motors

1/6 Scale WWII RC Tank

An electro-mechanical Valentine Day automaton with an 18 layer heart.

A 3D Printed Valentine For My Wife, With A Twist.

Create a 1971 VertiBird toy with a modern TWIST!

VertiBird Redo

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

Light control for rooms containing both Philips Hue and Nanoleaf lights using their respective REST APIs

Raspberry Pi Hue/Nanoleaf Light Switch

Tim Schonberger

Universal DSP radio, now with new firmware and SI4732 Chip

DIY Si4732 LW,MW,SW,SSB Radio with 2.8 inch touch

mircemk mircemk

Low end car radio with segmented LCD display gets augmented with a MCU, bluetooth audio module and things like that

Augmented Renault Megane 3 low end car radio

View all

Bits