Close
0%
0%

Ryan Gass

I am a 20 year old who enjoys working with electronics, computers, and audio production.

Following
Send a private message
Similar accounts worth following
18.4k Followers
3 Following
5 Projects
27 Likes
ryan-gass
Send a private message

This user joined on 03/02/2014.

2.7k
22
4
12
An emulated 8-bit computer based on an Arduino.
Project Owner Contributor

Arduino 8-bit Computer

Ryan GassRyan Gass

959
17
1
7
A flexible web app for monitoring sensor data
Project Owner Contributor

Home Sensor Monitor

Ryan GassRyan Gass

1.8k
4
0
5
My attempts to program a PSoC microcontroller from Linux.
Project Owner Contributor

PSoC on Linux

Ryan GassRyan Gass

4
0
2
Rover firmware for the Kendryte K210 with autonomous navigation.
Project Owner Contributor

Kendryte K210 rover

Ryan GassRyan Gass

654
2
0
1
Using a FPGA as a robot controller to learn Verilog.
Project Owner Contributor

FPGA Robot Controller

Ryan GassRyan Gass

24.9k
265
37
197
3D Printed ESP32 Powered Video Streaming Robot
Project Owner Contributor

ESP32 WiFi Robot

Max.KMax.K

6.7k
95
34
143
IT IS NOT ONLY GAME, IT IS NEW DEVELOPMENT INTERFACE. CPU ( attiny85, atmega328 or samd21 ) on fake micro sd card :)
Project Owner Contributor

μRetro game console with CPU on fake μSD cards

bobriciusbobricius

3.4k
69
3
76
Open hardware, 3D printed, 6 axis robot arm
Project Owner Contributor

Sixi 2

Dan RoyerDan Royer

3k
34
19
23
A contactless encoder for the NEMA 17 stepper motor
Project Owner Contributor

AS5600 Stepper Motor Encoder

KaneKane

2.8k
46
6
35
Low-cost industrial cobot
Project Owner Contributor

MACI Cobot - 6DOF - 5Kg - 850mm

Léonard DabinLéonard Dabin

2.1k
26
0
20
Step-by-step instruction on building a high-performance, CP/M-ready, expandable Z80 computer
Project Owner Contributor

Building a 22MHz Z80 Computer in 4 Stages

PlasmodePlasmode

1.9k
37
15
29
Based on Tiny030 design
Project Owner Contributor

Building a 68030 computer in 5 stages

PlasmodePlasmode

1.4k
29
9
23
Defining and implementing a bus protocol that is built around low-cost FPGAs to enable modular and affordable control and DAQ systems.
Project Owner Contributor

FBus: Open FPGA Realtime Bus

flowflow

1.3k
140
2
1
An 1U rack unit with 8 audio loops remotely controlled via MIDI messages.
Project Owner Contributor

MLS800

Bertrand LemasleBertrand Lemasle

879
13
1
10
A 9 axis CNC controller using the ESP32 with a WebAssembly powered 3D CAM interface
Project Owner Contributor

ESP-CNC: 9 axis CNC controller

funkBuildfunkBuild

739
7
0
6
Here is a proof-of-concept for DVI / HDMI output implemented on an iCE40 FPGA
Project Owner Contributor

DVI / HDMI Pmod for an iCE40 FPGA

Dan O'SheaDan O'Shea

651
11
3
10
Making an 80s GDC run for the first time in decades, and my first real hack on hackaday.io
Project Owner Contributor

uPD7220 Retro Graphics Card (and VGA hack)

Dylan BrophyDylan Brophy

543
9
0
8
My attempt to create a fully expandable 8-bit system built around a modern architecture
Project Owner Contributor

Going 8-bit in style: the PIC18 computer

KnivDKnivD

286
2
4
1
Use 10 channels of PWM dimming in an electric cabinet over Ethernet with the power of an ESP32
Project Owner Contributor

DIN Rail 10 channel LED PWM Dimmer

Patrik MayerPatrik Mayer

272
4
0
2
Testing the Arty A7
Project Owner Contributor

Arty A7

jlbrian7jlbrian7

172
110
0
5
An m68k homebrew with an FPGA acting as a VGA graphics controller
Project Owner Contributor

Diapason : m68k homebrew with FPGA graphics

Carson HerringtonCarson Herrington

154
71
0
1
An Arduino audio DSP library for the Espressif ESP32
Project Owner Contributor

yummyDSP

GaryGruGaryGru

80
1
0
0
Extended functionality MODBUS slave controller with RADIO interface onboard.
Project Owner Contributor

Multifunctional MODBUS controller.

Andrey VAndrey V

View all

Share this profile

Share

Bits

Eugene wrote 12/29/2018 at 07:20 • point

Ryan thank you for following my StereoPi project! 

(https://hackaday.io/project/162954-stereopi-diy-stereoscopic-camera-with-raspberry)

  Are you sure? yes | no

Kris Winer wrote 08/18/2018 at 14:18 • point

Thanks for following my MAX32660 Motion Co-Processor project!

  Are you sure? yes | no

bijtaj wrote 06/02/2014 at 22:05 • point
Thanks so much for the skull... my first one!

  Are you sure? yes | no

bijtaj wrote 05/30/2014 at 22:35 • point
Thanks very much for the follow for my Arduino Pi project... hope you will also skull it!

  Are you sure? yes | no

Send a private message to Ryan Gass

Become cool instantly

Create your Hackaday.io profile like Ryan Gass and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2019 Hackaday

Report user as inappropriate

You are about to report the user "Ryan Gass", please tell us the reason.