0%

0%

Ryan J. Dillon

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 11/03/2017.

Projects I Like & Follow

The 2018 Hackaday Prize

An efficient and compact generator that can be coupled with wind turbines or water wheels to produce upwards of 100W

Portal Point Generator

The 2017 Hackaday Prize

Quickly identify radioactive materials with a pocket-sized ion chamber. Built from standard parts for easy manufacture and low cost.

Open Radiation Detector

Carlos Garcia Saura

Fully 3D printed x-ray machine using a dental tube and a custom transformer.

3D Printed X-Ray Machine

The 2018 Hackaday Prize

An easy to build, setup, and use emergency communicator for disaster-struck zones with no working power or comms infrastructure.

PR-Holonet: Disaster Area Emergency Comms

inventive.prototypes

Hackaday Prize 2019

University digital Logic Learning Xtensible board release 3 with SDRAM

ULX3S powerful ECP5 board for open source FPGA

Independently charge 10 Li-Ion cells @ 1A each, with $18 of Prime parts and an ATX supply.

Minimalist Li-Ion Charger

Hackaday Prize 2019

'Professional' wind instruments are mounted high on a pole in an exposed location with LoRa data transmission

Low Power High Accuracy Weather Station

Tegwyn☠Twmffat

Driving and use the ИГГ1-64x64M. High voltage vacuum dot-matrix display made in Ukraine in the 80's by Gazotron

ИГГ1-64x64M Adventure

The 2018 Hackaday Prize

A simple board, driving 2 nixies from discrete transistors and an Atmega8.

Low cost dual Nixie Driver

A DIY solder paste dispenser. A DRV8825 drives a microstepper actuator in combination with syringe to deliver paste.

Hand Held Solder Paste Micro-dispenser

Dead bug style LM386 audio amp circuit inside a human figure made of copper wire.

Audio Man Circuit Sculpture

Stereo audio spectrum analyzer using IN9 neon tubes and STM32F4 microcontroller

IN9 tube spectrum analyzer

Using a 1979 Ariens chassis, but replacing the small engine with a DC motor

Electric Snowblower Conversion

A reprogrammable replica of the famous TIL311

DIYTIL311

This has so many different uses not only in chemistry. This kit can be used in engineering, Stop motion, biology, manufacturing and more

Stand, Clamps and Equipment Kit

Tinkers Projects

Hackaday Prize 2019

DIY Tiny LED Displays ... need I say more ...

TinyLED Displays

sjm4306 sjm4306

Ultra-Light Fireproof Concrete Using Starlite

Starcrete

BPI-K210 is the first Banana Pi board with RISC-V chip design.An integrated artificial intelligence SOC chip solution t

BPI-K210 RISC-V 64bit AI development board with K2

View all

Bits

Jacob Still wrote 07/12/2019 at 00:10

Ryan, thanks for teking the time to like and follow my #DIYTIL311 project!

Are you sure? yes | no

Radu Motisan wrote 10/03/2018 at 08:59

Thanks for following # Global radiation monitoring network . You can get your own detector on http://uradmonitor.com/products/ or on Tindie and support the ongoing effort.

Are you sure? yes | no