Close

27106 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

  • Install the Wheel Hubs
  • Instructions     from Balancing Robot
  • Insert one of the Wheel Hub Spacer onto the wheel shaft. Insert one of the Wheel Hubs onto the shaft. Apply pressure to hub while tightening to shaft. Repeat for the other side.

  • Install the Wheels
  • Instructions     from Balancing Robot
  • Press one of the wheels onto the wheel hub. You may or may not need to press hard to get the wheel onto the hub fully. Attach one of the hub plates onto the wheel with 3 M3x20mm screws. It would be best to try and align one screw to one of the screw...

  • Install the Custom Carrier Board
  • Instructions     from Balancing Robot
  • Flip the assembled Wheel Base over. Make sure the motor wires are fed through the cutout. Mount the carrier board onto the Wheel Base using 4 M3x?? screws and the four (4) 3D printed PCB spacers. Plug the motor connectors into the connectors on the carrier...

  • Install the Battery Deck
  • Instructions     from Balancing Robot
  • Stack the Battery Deck onto the Deck Riser. Make sure the pigtail and the Panel Mount USB cable is fed through the opening in the Battery Deck. Attach the Battery Deck to the Deck Riser using 4 M3x8mm screws.

  • Install battery
  • Instructions     from Balancing Robot
  • Install battery into the Battery Deck. Notice a foam strip was attached to one side of the wall. This is to add some cushion and to make sure the battery does not rattle all over the place. Attach some foam strips on the underside of the battery straps....

  • Prepare power switch
  • Instructions     from Balancing Robot
  • Solder wires to the switch and connectors according to the following wiring diagram:For the connectors, you may choose any connectors you want. In my case, since the battery came with a Tamiya connector, I used the corresponding Tamiya connector for...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday