103 Results for "대구오피강추↲www,optime4.com대구오피 대구마사지 ↲ 대구오피ᙗ 대구오피생각ᙗ 대구휴게텔 대구키스방 타임"

Remote temperature monitor
Instructions from Remote temperature monitor
Configure Raspberry Pi:1. Load GPIO and DS18B20 modules at boot: Add w1-gpio and w1-therm to /etc/modules2. Install python libs for gpio:sudo apt-get install python-rpi.gpio3. Copy python scripts and web pages:https://github.com/james7780/TempMonitortest.py...

Classifying everything using your RPi Camera
Instructions from Classifying everything using your RPi Camera
Install requirements for python and query CNN codesudo apt-get install python python-pycurl python-lxml python-pipsudo pip install grabsudo apt-get install apache2mkdir -p /dev/shm/imagessudo ln -s /dev/shm/images /var/www/imagesThen you must forward...

Phishing WiFi hotspots with captive portals
Instructions from Phishing WiFi hotspots with captive portals
Give lighttpd the appropriate permissions to the www folder. Navigate to the website's root folder: cd /etc/www/Then change the ownership of the files in the folder: chown http:www-data *Finally, assign the appropriate permissions, e.g. 644: chmod 644...

ESP8266 Mobile Rick Roll Captive Portal
Instructions from ESP8266 Mobile Rick Roll Captive Portal
Upload Firmware and SPIFFS data After your firmware build is successful you can upload it by clicking the arrow under the checkmark in the PlatformIO toolbar. You can add/edit the files in the "www" folder to your liking. (Files in the "www" folder will...

PolaPi v2.0
Instructions from PolaPi v2.0
4D Systems 4DPi-35 installationdo not attach the display yet, install kernel first then shutdown the Pi and attach it.wget http://www.4dsystems.com.au/downloads/4 DPi/All/4d-hats_4-4-21_v1.0.tar.gz sudo tar -xzvf 4d-hats_4-4-21_v1.0.tar.gz -C / sudo...

Lid design, part 1
Instructions from Quiz-o-matic wireless buzzers
I wanted a design where the push button would sit in a recess in the centre of the lid, just for the aesthetic. The idea was there would be very little gap between the button top and the surface of the lidto make it feel more like an arcade button. Since...

More Info, once you are Finished
Instructions from Raspberry Pi PhotoBooth w/ HTML5 & NodeJS
The quick install will take care of the required dependencies (nodejs, php, chromium, etc), as well as setup the chromium-browser kiosk and the Wifi AP. Once the pi reboots, the Wifi AP will be available via SSID: PhotoBooth, Password: photoboothpass...

Configure your web server
Instructions from Remote environmental logging
Install a web server and enable PHP support. I used a Raspberry Pi and Lighttpd for my web server. If one plans to go the same route, here's the commands to enter on the terminal:apt-get install lighttpd php-cgi lighty-enable-mod fastcgi lighty-enable-mod...

The Software
Instructions from InspectorBot
Starting at this step, I am assuming there is already a Raspberry PI loaded with an operating system and the PI is connected to WIFI. I am using “NOOBS” and WinSCP to load files to the PI. You will also need access to the terminal and VNC....

Robot Using Raspberry Pi & "Bridge Shield"
Instructions from Robot Using Raspberry Pi & "Bridge Shield"
Next we will need to do a bit of programming for the Pi to interface smoothly between the Pi cam and the webpage. We will be passing some values to a python file from the PHP instructions to trigger the GPIO pins on the Pi (before you do this however,...

Upload and Compile
Instructions from Survey Rover
Click on the “Compile” button. Note: This step could be skipped. However, compiling is essential for debugging purposes. Connect the display to the PC. Make sure that you are connected to the right port. Red Button indicates that the...

Preparing & Installing Front-End To SD Card
Instructions from Diy Small But Powerful ESP32 NAS
For the SD card, you need a SD card formatted in FAT file system to make this work, as the ESP32 can only access the SD card in FAT file system.In my case, I am using three 16GB micro SD card with FAT file system from Aliexpress.Download and copy everything...

Creating a WiFi-controlled Automatic Door Lock
Instructions from Creating a WiFi-controlled Automatic Door Lock
Create an appHaving an app to request functions is a lot easier and has a better UI than the terminal. There is an app template at /www/apps/ which you can use to build an app. Copy the onion-template folder and give it an app name. Edit the app.json...

Start Printing!
Instructions from Sotto: A Silent One-Handed Modular Keyset
Get your prints started! If you don't have a 3D printer, you can always take advantage of awesome services like 3dhubs and fictiv. Download your stl files here! You'll need 5 holders, 5 covers, 1 base plate, 1 "scale 100", 1 "scale 75", and 5 "scale...

Compile and Upload
Instructions from Mandala Maker
Click on the “Compile” button.Note: This step could be skipped. However, compiling is essential for debugging purposes.Connect the display to the PC. Make sure that you are connected to the right port. Red Button indicates that the...

|<
<
2
3
4
5
6
>
>|