8219 Results for "3D printing"

More 3D-printing
Log from Ardumower Arctic Hare X2
Another part just finished!next part is already printing and will be finished tomorrow.

8/12 - 3D Printing
Log from Modular USB Hotkey Controller
Today we finalized the magnetic connector design and started printing the module bases. We also started soldering the keypad module.

3D Printing first parts
Log from Pressure Warning Device for Manual Toothbrushes
First Prototype will use a spring and piston design that thriggers the indocator. Printing in Progress right now...

3D Printing Rings
Log from Lord of the Rings
Printing the rings presented its own set of challenges. The printers that we had used were communal, meaning that we had to share printing time with other people. If a printer did not work, or if a another person had to print an especially large item,...

3D Printing PITA
Log from xDSL lightning defeat device
This is just a note to self: If printer fails make sure extruder temp sensor did not shake loose before reprinting the same part 4 times in a row.

3D printing exoskeleton parts
Log from ALICE: Robotic Exoskeleton
One of the main goals of this project, is to make it low-cost so people all over the world can afford it. 3D printing technology is essential for rapid prototyping and for reducing costs.After several hours of 3D printing, right knee parts for our robotic...

Phase 2
Log from ZemiCharmed Life
Semicopacetic 3D printing mockups progress.

3D Printing parts!
Log from Arduino rocket stabilization system [UD: 7/14/17]
Have started work on 3D printing the prototype fin can, finally ditching the cardboard. The black part's notches for the servos are too small, reprinting at the moment

3d printing stuff
Log from electric hurdy gurdy synthy
currently printing all of this, I already forgot the tooth count and ratio of the gear box, but I think it's something like 1:5 or 1:6. Or maybe it was 1:10. Reminds me a bit of my #Locomatrix - 3D POV - a different approach

3D printing progress
Log from VT100 simulator and 3D printed replica
In parallel with working on the simulator, I'm printing the STL files provided by Michael Gardi: https://www.instructables.com/23-Scale-VT100-Terminal-Reproduction/Around this point, the VT100 body is almost done. Just the back third left. ...

3D printing of the components
Log from 3D Printable Portable Slit Lamp
We have printed the different components of the design in PLA using the Fracktal Works "JULIA" 3D printer.

3D Printed Case Design
Log from Color Handheld Gamer Prototype
Ordered my first ever 3D printed design today for this project and due to be shipped later this month. Used gmax 3D modelling software (3DStudio Max Lite) and the cost for 3D printing and shipping was $40 for 2 units in black.

3d Printing Notes
Log from ArduAOA
1.5mm = .060 in min wall thickness.6mm = .024 in absolute min wall thickness.3mm = .012 in gap for loose fit.15mm = .006 in gap for tight fitWhen 3D printing parts that will fit together, a clearance of about 0.3 mm for a loose...

|<
<
1
2
3
4
5
>
>|