8219 Results for "3D printing"

3D Printer
Log from Custom Articulated Joint
At some level, this project was an excuse to buy a 3D printer.I first bought a Lulzbot Mini (https://www.lulzbot.com) and I can't say enough good things about this thing. It was fabulous as printing all the demos I threw at it and for a 3d printer newbie...

Small change to 3D model
Log from Tenkeyless Keyboard with 2 Port USB-Hub
Had to remove some material at the housing around the USB-C Port. So that no material has to be removed with any tools after 3D-printing.

3D Printing of the casing
Log from evive: a prototyping platform for makers
Lets show how we made the casing of evive. There are three parts of casing:Bottom CaseTop CaseLid (We call it magic lid)All the CAD files are available opensource at: https://grabcad.com/library/evive-case-1For prototyping of evive, we have used 3D printing...

Professional MJF 3D-Print
Log from USB-C-PD Soldering Pen for Weller RT Tips
New, slightly improved design is just put into production in a professional 3D-Printing house.I've chosen Nylon PA12 with an 80µm layer height in semigloss black.The prize @100 pcs. comes down to a few Euros.This is a render of the current CAD model....

3D Printing the Tray
Log from APC UPS NMC from a Pi
I've been tweaking the 3d printable design for the tray. Tabs and panel cutouts fit a Raspberry Pi 1, but can easily be adjusted for any model. I've also included a way to hold a piece of PCB in place, so it can slot directly into the card edge reciprocal...

3D-printing has started
Log from SATRAN - Satellite Tracking Antenna
Nothing beats the little 3D-printer when prototyping. I have a Creality Ender-3 that recently replaced my older TronXY, and I absolutely love it!Three parts have been printed so far, the rest still being designed. The first parts make up the turntable,...

3D Files
Log from The Compost Professor - A Smart Composting System
October 19, 2017I printed my early prototypes, cases, etc on my home 3D printer (a Monoprice Maker Select Plus, which I highly recommend). I used a 3D printing service for my final prototype prints. Pictures below. STL files on thingiverse - https://www.thingiverse.com/thing:2586719...

3D Printed Air Plant Hangers
Log from Barb Makes Things
Some people put Tillandsia in hanging glass globes, but modeling and printing your own design is way more fun. :)

CAD and 3D printing done
Log from OpenEyes
[files available at https://github.com/cristidragomir97/openeyes_cad]

First 3d print almost complete!
Log from Hackaday Superconference 2019 Badge Enclosure
Just need the cartridge door and actually transparent versions of all of the light pipes. Printing now...

3D Printing and Painting Parts
Log from CheerUp
https://www.thingiverse.com/thing:4939545

3d printing test fits
Log from 5+ Axis Robot Arm
https://instagram.com/p/6vAFGjofBY/?taken-by=imakerobotshttps://instagram.com/p/6xiBxsIfMA/?taken-by=imakerobotsNothing sucks like printing part that has to be sanded to make it fit.Over the weekend I printed several pegs and holes of graduated sizes...

3D printing the shell
Log from Powerful Portable Speaker
For this project, I commited pretty much any crime in design for 3D-printing. No flats, lots of overhangs, thin shell (2mm). So the only way I could print this without excessive use of support structures was cutting the design into pieces that could...

More 3D-printing
Log from Ardumower Arctic Hare X2
Front nose 1/2 just finished! Right side is almost completed.Body assembly Body on chassischarging pin

3D Print
Log from Team TAHMO
As this is a very first attempt at 3D printing, the results are quite nice. We used a Da Vinci Junior 1.0A that uses PLA for its prints. The first time, the two halves of the box fitted nicely, as did all the 'innards' of the box. Some minor modifications...

|<
<
2
3
4
5
6
>
>|