Projects
Recently Updated
Most Likes
Newest
Project Lists
Discover
Contests
Courses
Stack
More
Courses
Tutorials
Events
Hackerspaces
Hackaday.com
Tindie Marketplace
Sign up
Log in
Close
16 Results for "3D printing"
3D Printed Chamfer Tool
Project
by
Alex Rich
Slide this Japanese style hand plane along any rough corners to give them a clean chamfer (AKA beveled edge). Uses a standard razor blade.
3.1k
23
Low Cost Injection Moulding Machine
Project
by
James Cannan
Low cost manual injection moulding machine for supporting makers and bridging the gap between 3d printing and mass manufacturing.
450
5
Improved Allen Wrench / Hex Key Holder
Project
by
Alex Rich
3D Printed holder: Allen wrenches are held in a circle by a single o-ring, all individually accessible.
906
48
Hack into an existing Multimeter
Project
by
Max Schnorpfeil
Using the impact resistant case of a multimeter for your electronics Demonstrated on the design of a Zener-Tester / LED-Vf-Tester
3
4
Locking ball and socket gooseneck system
Project
by
Alex Rich
3D printed ball and socket joint with a quarter turn twist lock at each joint. Brick shithouse goosenecks!
737
91
Thiiiiiiiing
Project
by
DeepSOIC
What if you could slip a dremel into your pocket?
568
15
Repairing a tool wall organiser
Project
by
Budiul Cristian Carol
In time, more and more hooks broke. I decided to print some improved hooks, that will last longer
5
10
E-TKT: anachronic label maker
Project
by
Andrei Speridião
An open source label maker that fuses together both old and contemporary technology to create something as ubiquitous as... EMBOSSED LABELS!
89
99
zero-multi-t
Project
by
rspet
Raspberry Pi Zero W based debugging multitool
4
2
Tool-Doggo
Project
by
Kenny.Industries
A robot following you via Wifi-Signal and hands out equipent/payload from a modular rotational carrier.
3
4
SMT Part Tape Counter
Project
by
Owen Trueblood
Pull the tape through a slot and get the # of parts on a 7-seg display.
11
9
Square wave generator
Project
by
Ringo2k
I found a 74HC294 programmable clock divider in my IC box. After reading the datasheet i liked to build a little box...
1
1
Solder Ninja Tweezers
Project
by
Nicolas Schurando
USB-Powered Soldering Tweezers compatible with Weller RTW Tips
7
6
Cable Six Axis Robotic Arm
Project
by
3D Meister
This six axis robot arm is controlled by hand with 6 slide controls. It is an experimental project to research movements and for challenges.
34
29
Robotic 3rd Hand
Project
by
Tim
The Robotic 3rd Hand is worn on the forearm and hands you a tool right when you need it.
82
46
1
2
>
>|