Close

21326 Results for "8-bit cpu"

  • 8 bit CPU desing progress

  • Great progress today, some instructions already working on Logisim (check it out the files on github).But...I figured out that for this design to work, there will be necessary two 3-state output drivers (sixteen gates) in the out of each register (and...
  • 4-bit TTL ALU

  • If you are interested in flipflops, building CPU's might also be of interest to you.... I started a new project, a 4 bit TTL ALU with only 7 TTL IC's.  It fits on a 1 x 1 inch PCB.....And the next project is a TTL CPU on one square inch...
  • 16-bit Dividing

  • I've been programming furiously.  I have 16-bit functions going - Add, Subtract, and Divide.  And I have 8-bit multiply going.  I've changed from putting the operands on the stack to having a dedicated memory location for them.  I...
  • 4-bit cpu schematics 1.2

  • I realized that the flip-flop chip 74LS173 is obsolete and no longer available.Replaced the obsolete 74LS173 with other TTL flip-flop 74LS175.Added jumper and switch for manual step clock operation,Added 5v voltage regulator and bypass capacitors.The...
  • 16x8 bit Diode PROM

  • Diode PROMHere is the Diode PROM:The "CS" DIL switch allows up to 8 PROM cards. I am only using one this time.The board layout is as follows:Laying out the diode PROM is quite time consuming, and near the limits of the Easy EDA auto-router. So I will...
  • Created Register Schematic in Upverter

  • Completed V1.0 schematic of one of the 16 bit registers.  There will be two of these (AB and XY)  Created an Upverter project and added to the links. https://upverter.com/2-Zons/1a1b5dbb645ac3ba/8-Bit-Breadboard-CPU---AB-Register/