Close

5666 Results for "fix"

  • Attach the exhaust hub
  • Log     from Laser cutter fume filter
  • I sew a 100mm hole to the back of the laser cutter box. Then I attached a tin hub at the back side and used silicone do fix it and make it air tight. Then I attached the flex pipe using a pipe clamp. I cut 1/3 of the pipe off. The one end was attached...

  • Z-axis / Audio Mixer
  • Log     from Rasterphonic Glove
  • This project will have five separate audio tone generators controlled by the X,Y voltages. I wanted the volume of these tones to be controlled by the distance of the fingers from the screen (Z). I'm not very musically inclined, but I can tap a pattern...

  • 3D printed body
  • Log     from Tote HaD
  • Hey all, @davedarko writing. As you might have seen at the #Hackaday | Belgrade event - I've brought my Tote with 3d printed legs along to the workshop. There I was asked for the files and @Radomir Dopieralski told me I could share them in a log. It...

  • CPU PLA terms almost done.
  • Log     from Kestrel Computer Project
  • Over the weekend, I spent time in LibreCalc to create a set of instruction decoder "PLA" minterms and the desired output enables they imply. I'm only missing CSRR* instructions at this point, but hopefully I can get those implemented soon. These are...

  • Almost there
  • Log     from Project 72 - Korg DW-6000 wave memory expansion
  • Hi there, after some struggle I've managed to get even closer to the end. What I got now is an almost working version. Yes, this time I have burnt an EPROM (the last empty one I had - I don't have an eraser, but I've already ordered some EEPROMS) and...

  • I ran into a problem...
  • Log     from 8 note Step Sequencer
  • Hey guys!I had two weeks of holiday so that's why I haven't updated the project for some time. But I'm back now and during the holidays I found a simple multi-meter that will come in handy and I've used it quite a lot now. When I found it the battery...

  • Project Hemisphere
  • Details     from Project Hemisphere
  • Current commercial and consumer grade wind turbines, while greatly reducing our dependancy on non-renewable energy sources, have some problems of there own. To begin, I would like to clarify that for my purposes I will be refering to a HAWT (Horizontal-axis...

  • Mysterious crashing - PLL issue
  • Log     from Gadget
  • I'm mainly writing this here so I've got something to refer to.I've got the base system running how I like now. It boots, starts the USB gadget serial and ethernet, and registers a link-local IP address. I've got AVAHI running, so I can find the board...

  • Server Health Improvements
  • Log     from Boxes.py
  • The last few months complaints about poor performance and an increasing number of 502 errors have been piling up. The later were especially puzzling as it means there is a problem in the communication between the web server and uwsgi instance in the...

  • 28.8MHz RTL-SDR TCXO
  • Details     from 28.8MHz RTL-SDR TCXO
  • The standard RTL-SDRs (and especially ones in a smaller case) drift quite a lot in frequency until they have warmed up. This makes receiving narrow band signals (in the HF bands, using an upconverter) quite hard without periodically readjusting the tune...

  • Grow Update & Controller Problems
  • Log     from Modern Herb Garden
  • Well despite the lack of proper automation (my controller is currently out of action while I fix the water level sensor problems), there has been good growth!Unfortunately my plants have been showing some nutrient deficiency problems, such as yellowing...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday