Close

4590 Results for "kit"

  • Wood Works
  • Details     from Wood Works
  • Essential woodworking tools:Hand Toolsawlclawhammer, rubber hammer and wooden malletsmall, medium, large Philips screwdriversset of chiselsflat, round and curved fileangle square, T square, L square, spirit level, ruler and a pencilclamps (lots of clamps)stanley...

  • LAMEBOY Playing PewPew Games
  • Log     from PewPew FeatherWing
  • I recently assembled a @davedarko's #LAMEBOY kit, and I wrote a simple library in MicroPython to handle all the hardware on the device. Then I thought, hey, this has buttons and display, I bet it could run PewPew games! So I ported the library to...

  • ISP Modem Monitor - Shaw Eyes
  • Details     from ISP Modem Monitor - Shaw Eyes
  • Based on the Particle.io Photon. Opto-isolated to protect your computer in case of FET failure. Design to switch the low voltage output of the power supply to your modem, I terminated in a DC barrel connector male and female, to go inline to the cable...

  • Wi Wi-Fi?

  • Log     from SCOUT - Smallest fully featured folding quadcopter
  • While SCOUT is intended to be a long endurance UAS, at least by micro quad standards, its not intended to be long range. It will be operating using 2.4ghz WiFi for telemetry, control, and FPV (with a standard 2.4ghz radio as a backup, of course)However...

  • MAP4
  • Details     from MAP4
  • Maker's Asylum (https://www.makersasylum.com/) is a community maker space in India with locations in Mumbai and Delhi. The MAP4 is a badge project to introduce members to the joy of Soldering and blinky LEDs. We got kits built in May 2016 just in...

  • The Robot Electronics
  • Instructions     from Raspberry SPy Robot
  • I began by assembling the 2WD MiniQ chassis kit from DFRobot. I slid the wheels onto the motor shafts, then inserted them into brackets and attached them to the chassis. Finally, I added the metal supports. Now it was time to build the main board. The...

  • Gesture Board Adapter
  • Log     from MIDI Space
  • Rather than forking out the $140+ to get the Hillstar Development kit, I opted to purchase the MikroElectronika Gesture Board Adapter. Just about $21 delivered, this board was a lifesaver (for me and this project).I bodged a few pins onto one of my existing...

  • Muffsy Stereo Relay Input Selector
  • Details     from Muffsy Stereo Relay Input Selector
  • Update! The complete DIY kit is for sale on Tindie:https://www.tindie.com/products/skrodahl/muffsy-relay-input-selector-kit/ The code, gerbers and Eagle files all reside here:https://github.com/muffsy/RelayInputSelector Instructions on muffsy.com:https://www.muffsy.com/muffsy-relay-input-selector-4.html...

  • Lazy Susan Pivot Repair
  • Details     from Lazy Susan Pivot Repair
  • Shortly after moving into our home the Lazy Susan broke. After spending a few months trying to locate a replacement part, without success, I decided to attempt to replace the part with a 3D printed part.  Unfortunately, I didn't have a 3D printer...

  • Jackel3D
  • Details     from Jackel3D
  • Using the parts obtained from tearing down a Da Vinvi Jr 3D printer, I will be creating a conversion kit. The Y axis and frame are already modeled and parts are being printed and tested now. The goal here is to make a more stable capable printer...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday