Close

1471 Results for "solder fume extractor"

  • Solder-Smoke-B-Gone
  • Details     from Solder-Smoke-B-Gone
  • How does it work? Using an infrared (IR) emitter and a infrared (IR) receiver a cheap proximity sensor can be created using off-the-shelf parts connected to an Arduino. The proximity of the solder stick to the emitter/receiver pair triggers a secondary...

  • Capable solder fume extractor
  • Details     from Capable solder fume extractor
  • The old incapable fume extractor When I searched the internet for other solutions, it turned out that a tube fan could be a good alternative. And at about € 65 a lot more attractively priced. I bought one and then wondered how to make a good...

  • denhac
  • Details     from denhac
  • Our Mission: To create and sustain a local, community driven, shared space, that enables education, experimentation, and collaboration, by applying the spirit of DIY to science, technology, engineering, and art.Denhac is an IRS designated 501(c)(3) charitable...

  • Retro Modules
  • Details     from Retro Modules
  • You don't need much to build a Retro Module. For a host module (e.g. one that will house the main microcontroller board), you can start with a female DE-9 Connector. Your first client module would use a male DE-9 Connector. Modules don't need to be enclosed....

  • Modern Ergonomic Soldering Wands
  • Details     from Modern Ergonomic Soldering Wands
  • Inspired by what is admittedly a humorous image at first glance ( http://i0.wp.com/makezine.com/wp-content/uploads/2016/03/stock-photo-beautiful-woman-repair-soldering-a-printed-circuit-board-204001492.jpg ), I stopped and actually picked up my (cold)...

  • Mini Selective solder machine
  • Details     from Mini Selective solder machine
  •    With increases in PCB complexity and component densities, selective soldering is a popular technique for mixed technology PCB boards containing a small number of through hole joints or components.  You can use a selective solder machine...

  • $150 Pick and Place Machine*
  • Details     from $150 Pick and Place Machine*
  • (Skip to 2:50 to see it in action!) A Highly Specialized Pick & Place Machine First, some prerequisites: Your board must fit within the print area, with about 3" to spare in each directionYour board must only have 1-2 BoM itemsSingle-sided assembly onlyThese...

  • Data-To-SD
  • Details     from Data-To-SD
  • No components needed to solder on (Except the wires you solder on the pins) Has 2 layers needed to be printed (Top & Bottem)

  • 0802 LCD I2C Adapter
  • Details     from 0802 LCD I2C Adapter
  • Instructions Place the display face down.Insert 2 x 7 header pins into positions 1-14, short end first. DO NOT SOLDER. On 16 pin displays, leave 15 & 16 open.Insert 2 single header pins into position A and K, short end first. DO NOT SOLDER.Place the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday