0%

0%

sergio7654

Following Follow me

Similar accounts worth following

This user joined on 03/14/2021.

Projects I Like & Follow

Hackaday Prize 2019

A powerful, compliant actuator for legged robotics

OpenTorque Actuator

USB Power Delivery Based Lithium Polymer Battery Charger

LiPow - The USB C LiPo Battery Charger

alex-klimaj Alex Klimaj

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

phil-handley Phil Handley

A HAT to easily interface a Raspberry Pi with a KNX bus.

KNX Raspberry Pi HAT

tijl-schepens Tijl Schepens

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

The desktop with an arduino as the main processor. Multitasking, Gaming, Graphics, and (later) File IO

Arduino Desktop

dylan-brophy Dylan Brophy

100% PLA 3D Printed aircraft (excluding RC gear)

3D printing an RC airplane

A cheap alternative to more expensive BLDC controllers, where only simple operation is required. More features may be added as required.

Modified ESC for Bidirectional BLDC Control

How to get the Onago to, well, fly!

Onagofly Hacking

Step-by-step instruction on running Skype on Raspberry Pi using ExaGear Desktop

Run Skype on Raspberry Pi

The 2016 Hackaday Prize

Toolchain to start making your environments connected in a single cloud

Multisite Home/Office/Hackerspace Automation

joshua-conway Joshua Conway

Turned an antique intercom into an Amazon Echo

50s Intercom Raspberry Pi Echo

nickrbrewer nick.r.brewer

The best of model rocket tech powered by Arduino!!

Arduino TVC ModelRocket

nikhil-mishra Nikhil Mishra

ModbusBox has embedded setup web-page. Yo do not require to program anything to connect any modbus RTU device to MQTT.

IOT ModbusBox

Hackaday Prize 2020

The New Dexterity Low-Cost Robotic Airship for Education and Research

A Helium-Based, Affordable Robotic Airship

new-dexterity New Dexterity

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

An electronics design tool for capturing current profiles of battery powered devices and optimizing battery life for your IOT projects

BattLab-One - Battery Optimization Hardware

bluebird-labs-doug-peters Bluebird Labs Doug Peters

how to setup Phabricator on a raspberry pi 3B+ with a RAID on usb sticks to store the data somewhere else than on the SD card

Phabricator on raspberry pi

nathann Nathann

View all

Bits