0%

0%

Sebastian

it me

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Github

This user joined on 10/27/2018.

Projects I Like & Follow

Hackaday Prize 2019

High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®

Axiom: 100+kW Motor Controller

Hackaday Prize 2020

Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls

Low Power ESP32 Handheld

An digital clock made out of 144 7 segment displays

7 Segment display array clock

2021 Hackaday Prize

3D Printed Micro-Servo Hexapod

ZeroBug - DIY Hexapod Robot

Supplyframe DesignLab: 2022 Hackada…

Open up a 2010 iPad, remove its logic board, and fabricate a new board based around the Raspberry Pi CM4.

Put a Raspberry Pi CM4 into an original iPad

A FeatherWing with a LCD, BB Q10 keyboard and a 5-way button.

Keyboard FeatherWing

3D Print yourself some of these magazines to keep your shop organized and boost your pick and place productivity!

SMD Component Magazines

v1 USB keyboard approximately the size of three pennies in a line; v2 around the size of a quarter

The Smallest Keyboard

TEC.IST TEC.IST

Recuse a 20W Portable Rechargeable Cordless LED Work Light

Recuse a 20W Portable Rechargeable Cordless LED

Presta valve extension with built-in, no battery pressure sensor. Connect and forget. Indefinite lifetime.

No battery NFC pressure sensor for bike valves

An open source device for controlling your smart home. Works seamlessly with Home Assistant

Home Buttons

Matej Planinšek

In this project I use adressable RGB leds to make a linear clock. The clock will be connected to Google Calendar to show my appointments.

Linear Calendar Clock

2021 Hackaday Prize

Miniature battery indoor air quality, climate and weather forecast sensor with e-ink display.

eON INDOOR AIR QUALITY SENSOR

Andrew Lamchenko

Hackaday Prize 2019

Table clock with e-paper display

Agora clock

An Indoor Air Quality System with E-Paper Display, LoRa communication and WiFi AP configuration

Hermetis

Measuring the flatness of a surface with a laser and a webcam to microns over large surfaces.

Real-time Laser Measurement with a Webcam

old flip-dot matrix display repurposed as a clock

Flip-dot clock

This clock is accurate to +/- 1 sec/month without relying on GPS or NTP synchronization. The RTC is implemented in firmware.

A Very Accurate LED Clock

View all

Bits

Patrick Van Oosterwijck wrote 01/17/2020 at 15:13

Thank you for liking my #wESP32: Wired ESP32 with Ethernet and PoE project Sebastian!

Are you sure? yes | no