Close
0%
0%

Soren Andersen

Hobbyist

Copenhagen
Following
Send a private message
Similar accounts worth following
1 Followers
9 Following
0 Projects
0 Likes
soren-andersen
Send a private message

This user joined on 08/08/2018.

91.9k
2k
26
453
A powerful, compliant actuator for legged robotics
Project Owner Contributor

OpenTorque Actuator

gabrael-levineGabrael Levine

78.6k
960
60
628
An open-source, 3D printed, high precision robotic arm with trainability
Project Owner Contributor

Dexter

haddington-dynamicsHaddington Dynamics

76.7k
2.3k
13
563
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
Project Owner Contributor

Atlas - 6DOF 3D printed universal robot

damian-lickindorfDamian Lickindorf

38.8k
3.6k
15
347
A low-cost, high-performance bipedal walking robot
Project Owner Contributor

Blackbird Bipedal Robot

gabrael-levineGabrael Levine

33.6k
606
25
468
An open-source, affordable, dynamic quadruped robot
Project Owner Contributor

mjbots quad

josh-pieperJosh Pieper

24.4k
159
25
122
ESP-32 WROOM-32D has Three phase Centre Aligned MC-PWM, Dual SPI, I2C, 2MHz ADC, UART and CAN. Enough for a controller.
Project Owner Contributor

ESP-32 BLDC Robot Actuator Controller

paul-gouldPaul Gould

19.3k
375
30
268
A better-than-servo motor for robotics
Project Owner Contributor

Custom motor for robotics

mishaMisha

18.1k
144
63
130
The reduction of strain-wave, but using a 'single' stage planetary gearset.
Project Owner Contributor

MPRT - Modified planetary robotics transmission

daren-schwenkeDaren Schwenke

13.7k
286
7
191
good looking and clever 4-legged robot
Project Owner Contributor

Dizzy Wolf

mishaMisha

13.3k
3.6k
6
88
A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance
Project Owner Contributor

3D Printed Robot Joint with Active Compliance

tim-wilkinsonTim Wilkinson

11.9k
181
17
126
A high torque, high precision, Strain Wave Gear (harmonic drive) based 3D printable closed loop servo actuator for use in robotic arms
Project Owner Contributor

Open HD

sam-armstrongSam Armstrong

10.1k
114
9
94
Cheap, Open-source, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.
Project Owner Contributor

CM6 - Compliant 3D printed robotic arm

petar-crnjakPetar Crnjak

6.8k
1.5k
1
37
Universal 3D printed gripper for robotics.
Project Owner Contributor

Modular Universal Jamming Gripper

cole-bCole B

4.6k
63
0
48
S_Drive is small bldc driver based on L6234 Three phase motor driver.
Project Owner Contributor

S_Drive - small BLDC driver

petar-crnjakPetar Crnjak

3.9k
58
4
49
MRC6502 is a fantastic opportunity to learn more about digital electronics and 6502 assembly programming... step by step.
Project Owner Contributor

MRC6502 - Modular Retro Computer

padnestpadnest

2.9k
51
3
41
A high performance 3D-printed harmonic drive
Project Owner Contributor

Embedded Strain Wave Actuator

cameronCameron

2.3k
26
5
38
Build CNC machines from scratch and learn how to write the code that moves their axes.
Project Owner Contributor

CNC machine hackings 2020: Direct extruder

norbert-heinzNorbert Heinz

2.3k
33
5
38
The Baffa-1 is an 8-bit CPU created from scratch using 74 series logic gates and built using custom printed circuit boards.
Project Owner Contributor

Baffa-1 Homebrew CPU Minicomputer

augusto-baffaAugusto Baffa

View all

Share this profile

Share

Bits

Send a private message to Soren Andersen

Become cool instantly

Create your Hackaday.io profile like Soren Andersen and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Soren Andersen", please tell us the reason.