0%

0%

Max

Big data developer, hardware hacker.

Netherlands

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/02/2016.

My Projects

Hackaday Prize 2019

What about having battery-powered Atari emulator in your pocket? Pretty good amuse after long day full of hardware hacking :)

Atari emulator for Hackaday Badge

Enclosure for Hackaday Superconference 2018 Badge

Hackaday Badge 2018 Case

Projects I Like & Follow

The 2015 Hackaday Prize

A printable robot arm, a little bigger than the usual hobby servo once.

3D Printable Robot Arm

andreas-hoelldorfer Andreas Hoelldorfer

The 2016 Hackaday Prize

OpenSource 3D printable Robotic Arm

Thor

angellm AngelLM

Hackaday Prize 2019

Homemade 8MHz Z80 SBC, 128kB banked RAM, RTC, SD (HD emulation), Basic and Forth interpreter, CP/M 2.2 and 3, UCSD Pascal, Fuzix and more...

Z80-MBC2: a 4 ICs homebrew Z80 computer

The 2018 Hackaday Prize

A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments

wESP32: Wired ESP32 with Ethernet and PoE

patrick-van-oosterwijck Patrick Van Oosterwijck

Official Hackaday Prize Entry

SatNOGS is an open source satellite ground station network, optimized for modularity, built using affordable tools and resources.

SatNOGS - Global Network of Ground Stations

pierros-papadeas Pierros Papadeas

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2018 Hackaday Prize

Affordable and open-source LiDAR based on 3x VL53L0X ranging sensor

xLiDAR

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

Telescope GOTO and autoguiding through ST-4 with an arduino

Arduino ST4 telescope control

kevin-ferrare Kevin Ferrare

Hackaday Prize 2019

ESPlay Micro is an ESP32 Based emulator device for playing retro games, able to play classic games NES, GB, GBC, SMS, Game Gear and more.

ESPlay Micro

fuji-pebri Fuji Pebri

A super tiny LED dimmer, controllable from any device, based on the ESP8266. Doesn't require an arduino or rasp pi.

$5 Wifi (RGB enabled) LED Dimmer w/ ESP8266

tom-clement Tom Clement

Hackaday Prize 2019

A dynamics oriented quadruped for research and education.

SmallKat: An adorable dynamics oriented robot cat

kevin-harrington Kevin Harrington

Official Hackaday Prize Entry

CANBUS adapter for the Raspberry Pi

CANPi

rasmusb RasmusB

The 2015 Hackaday Prize

This is a micro-quadcopter I'm building from scratch using an Arduino Pro Mini, MPU6050, Nrf24L01+ modules and coreless motors.

Quadcopter from scratch

Hackaday Prize 2019

Opensource, inexpensive, mobile thermal camera for use in electronics, home inspection, non-contact thermometer, heat distribution and more.

Open Thermal Camera

Previously I made 4-bit CPU, and I would like to follow the progress of human being.

Retro DIY computer project

In the 1980's, you had to know programming to use computers. They were used for... guess what? Computing! Want to see how it looked?

Badge for Hackaday Conference 2018 in Belgrade

voja-antonic Voja Antonic

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

View all

Bits

Patrice Freydiere wrote 11/09/2019 at 11:15

You liked the skinnable splitflap module project, thank's

Are you sure? yes | no

Patrick Van Oosterwijck wrote 04/22/2019 at 00:31

Thanks for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!

Are you sure? yes | no