0%

0%

Sina Roughani

STOP DEPRECATING SOFTWARE STOP DEPRECATING SOFTWARE STOP DEPRECATING SOFTWARE STOP DEPRECATING SOFTWARE STOP DEPRECATING SOFTWAR

Minneapolis

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 11/06/2020.

My Projects

A breadboard friendly VNH7040 breakout board to power all sorts of DC motor related tasks up to 36V and 35A.

Compact DC Servo Driver

Want a color-angular approach to inspecting your solder joint fillet quality? This rainbow-dome is your solution for less than $20!

DIY AOI RGB Light

I've always wanted to build a project that *needs* the million outputs of an FPGA, and well, this is it. An audio "camera".

256-Element Beamforming Microphone Array

A Field Oriented Control Electronic Speed Controller for the Raspberry Pi!

FOCESCPI

Microchip AN2434 explains how you can use an ATTiny to build a 2.5MHz quadrature encoder counter. This is a demo board for that.

TinyEncoder

My Monoprice 3D printer's firmware wouldn't print anything. Then I needed to place a WLCSP chip, and you won't believe what happened next!

Convert a 3D Printer to a Pick and Place Machine

View all 10 projects

Projects I Like & Follow

The 2018 Hackaday Prize

A modular smart speaker designed with localized speech recognition, customization and security in mind.

Modular Smart Speaker Assistant (jarvis-pi)

Hackaday Prize 2019

3D printed fully customizable exoskeleton arm development kit

3D Printed Exoskeleton Arm

A robot that moves vertically on the pipe.

Pipe Climbing Robot

Anastasiia Zelenska

An Arduino-programmable guitar effects pedal

ESP32 Guitar Shield

GaryGru GaryGru

How I added a 500W heater to my 3D printer to enable reliable ABS printing.

Enclosure Heater for 3D Printer

Hackaday Prize 2019

This is a self balancing robot created by star wars fan, with autonomous behavior, FPV and remote control modes

Droid Trooper

Electronic load that supports 3.3V-16V at 1A of current. Equipped with keypad, LCD, rotary encoder, STM32 Microcontroller and more!

Electronic Load 3.3V-16V 1A

The 2017 Hackaday Prize

An open-source robot developing environment that helps inventors build low-cost robots without having to start from scratch.

Robot Building Kit and Development Environment

The 2018 Hackaday Prize

An open-source panoply of UAVCAN connected boards to enable smart sensors and actuators for modular robotics development

CVRA's Robotics CAN Ecosystem

Arduino IDE for Building Compiling Environment of ESP32

Arduino IDE for Building Environment of esp32

A blockchain that can store massive amounts of data without messing up your computer

Data Storage Blockchain

Power up your ESP8266 with Arduino!

ESP8266 Arduino Tutorial, Part 2

Replacing the guts of a broken Powerbook with everyone's favorite SBC

Raspberry Pi Powerbook

Breakout board intended to secure Raspberry PI or others IoT products thanks to SE050 secure element from NXP

SE050 Security Breakout Board

Transforming a broken ZX Spectrum +2 into a battery powered cyberdeck of sorts with display and custom macropad

PIERCy-1 - ZX Spectrum +2 Raspberry Pi Mod

Raphael Raphael

A 3d printed version of the NaBi robot developed at UCLA

NaBi a sideways walking robot: 8BitRobots

My catch all project page to document my adventures figuring out hardware neural network chips: the NeuroMem CM1K, NM500, and More!

Adventures With Hardware Neural Networks!

Hackaday Prize 2020

Use Arduino MKR boards and shields with your Raspberry Pi

Arduino MKR bridge HAT for Raspberry Pi

View all

Bits