0%

0%

startupnomad

Startup founder and briefcase pc builder.

Singapore

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 08/23/2020.

My Projects

I built a gaming briefcase pc to inspire women in the tech community.

Gaming Briefcase PC (Pink Version).

I'm building my 2nd version of pc briefcase from scratch.

PC Briefcase

Things I've Built

PC Briefcase

First version.

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Official Hackaday Prize Entry

Arduino powered rocket stabilization system for mid to high power rockets that gets rid of the pitch over and subsequent downrange flight

Arduino rocket stabilization system [UD: 7/14/17]

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

The 2018 Hackaday Prize

This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!

LTE CAT-M1/NB-IoT Shield for Arduino

A software interface for the breadboard. Configures your prototypes without wires or other components.

The MetaBoard

I was always fascinated by delta robots. So I built one.

Delta robot "deltaR"

The 2015 Hackaday Prize

Environment friendly chemical rocket propellant, useable in liquid or solid state

Green eutectic rocket propellant

The 2016 Hackaday Prize

Pushing the limits of tiny robotics - MiniPIDDY is a miniturized version of my PIDDYbot - a Self Balancing Robot.

Worlds Smallest Balancing Robot? MiniPIDDY

The 2017 Hackaday Prize

A controller for all your IoT needs.

ESP IoT Controller

RISC-V is a free, open general-purpose instruction set architecture developed at UC Berkeley, designed to be flexible and extensible.

RISC-V Instruction Set Architecture

The 2017 Hackaday Prize

Very small robots with features equivalent to their larger counterparts. For classrooms, robotics labs and more!

Micro Robots.

An interactive artwork built to help with the goals of rhino conservation and electronics and computer science outreach

Erica The Cyber Rhino

Tyler Ward (Scorpia)

A 3D printed drone with an added pusher motor

3D Printable VTOL EDF Jet

The 2016 Hackaday Prize

Trying some different ideas to combine Snap Circuits with Lego. In this first attempt, I built a mirror spinner.

An Experiment to Combine Lego and Snap Circuits

Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.

Zakhar the Robot

Andrei Gramakov

The 2018 Hackaday Prize

Six axis closed loop motion controller for open source robotics development

Freedom Run

AVR (lordKiCAD)

LEDs master is a software for controlling big RGB LED matrix

LEDs master

Spectre Spectre

Building this eurorack module from the PCB

DIY Nonlinear Circuits Vactroll PiLL build

Bits