Repairs You Can Print Contest | Hackaday.io

170 projects

The 2018 Hackaday Prize

3D printed replacements for some broken and impossible to source clips for the privacy blinds in the rear of a luxury car

Daimler Blind Clips

mark-gaffney Mark Gaffney

The 2018 Hackaday Prize

Stationary bandsaw table insert for Craftsman 12" bandsaw

Bandsaw insert

The 2018 Hackaday Prize

Using an Arduino, a ball valve, some 3D printed adapters, and LabVIEW to save a few thousand dollars

Automated Gas Flow Shut-off

patrick Patrick

The 2018 Hackaday Prize

The door latch mechanism broke. Drew and printed a replacement, still going strong 4 years later

Microwave 3D print repair

I made these hangers because they always break and you can only buy in packs of 500 or 1000 pieces. I thought this model will be useful.

Vertical Blinds Hanger

This project will attempt to record the production 3D printed molds, in this case for a glider landing-strut boot

Printing Molds for Rubber Repairs

classicrockfanatic88

The 2018 Hackaday Prize

i show you my 3d printed loutspeaker cover

3D printed loutspeaker cover

aaron-christophel Aaron Christophel

Coming up with a better way to mark and label cardboard boxes.

Classing Up the Comic Book Boxes

The need is real to replace the missing handle to the attic stairs!

Regain access to the attic staircase

Top Lazy Susan metal pivot wore through, and it was old enough that replacement parts were no longer available.

Lazy Susan Pivot Repair

Do you have the tape dispenser, but not the core? Here is a 3d printable solution.

Tape Core

isaac-s-gentry Isaac S. Gentry

Closet doors always seem to fall off, the cheap wood-fill is about as strong as cardboard. I created a replacement pocket for the pegs.

Closet door replacement peg holders.

This old drill is still handy for light use around the house, but the NiCd battery pack is long dead. Why not use 4x AA NiMH cells in it?

Replacement Battery for Ryobi 7.2v Drill

Lost your mouse battery lid? Here's how I took care of mine...

Scan, trace, design, print, fixed!

joseph-chiu Joseph Chiu

A simple sleeve to use the gray-colored Ninja motor on (older?) black blades.

Ninja Blender Black to Gray Adapter

Broken ikea lamp I bought used and fixed it with 3D Printing

Ikea Lamp

romain-lapierre Romain LAPIERRE

The 2018 Hackaday Prize

Adapter to mount my internal gearhub shifter to the brake lever of my Cyclocross bike.

CX shifter mount

I am a student interested in being considered for the best student entry (Recreated a part my school couldn't find or buy online)

(Student) Ice Machine Part Replacement

Making the Boots Industries V2.5 3D printer usable.

Boots V2.5 Printer Repairs and Upgrades

I broke the original housing of my earbud to repair a broken wire connection. So I printed a new housing for the speaker.

3D printed housing for earbud repair

manwithoutoptions

3D printed a lever for a tire pump, since the original part crumbled to pieces years ago.

Simple fix for a tire pump

CodeMonkeyHacks

The 2018 Hackaday Prize

A few pieces broke on my IKEA TRYSIL wardrobe, so I CADed up some replacements and printed new parts that might just work even better.

IKEA TRYSIL Wardrobe Replacement Parts

The 2018 Hackaday Prize

My parents lost the bearing cap on their car. Our car service station couldn't get the part because the car is to old... So i made the part

Renault JE wheel bearing cap

florian-knopp Florian Knopp

This project has files can be glued into the corners using epoxy of a PrntedSolid Enclosure for a Lulzbot mini.

PrintedSolid Enclousre Brackets