0%

0%

sunskar dhanker

Student at the University of Illinois at Urbana Champaign

Following Follow me

Similar accounts worth following

This user joined on 10/09/2020.

Projects I Like & Follow

The 2017 Hackaday Prize

A versatile autonomous environmental drone using a buoyancy engine

OSUG: Open-Source Underwater Glider

Hackaday Prize 2019

This wind-up car gift card is fully 3D-printable and is the ideal present for your friends and family.

Fully 3D-printable wind-up car gift card

brian-brocken Brian Brocken

USB Power Delivery Based Lithium Polymer Battery Charger

LiPow - The USB C LiPo Battery Charger

alex-klimaj Alex Klimaj

Hackaday Prize 2019

Very new chip by Microchip(Atmel) ATmega4809 has a very unique CPLD like logic and also promised to be applied to next Arduino, why not try!

ATMega4809 developing board project

Hackaday Prize 2019

Loko is the 12 gram GPS tracker with extreme battery life.

Loko-the Tiniest GPS tracker with 270 days battery

akio-sato Akio Sato

Interfacing 3.5" HD 1.44 MB Floppy drive through FDD connector with Arduino UNO

Arduino raw data 3.5" Floppy reader

lukas-vacek Lukas Vacek

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Matching the performance of an overmolded strain relief using 3D printing and flexible filaments

3D Printed "Molded" Strain Relief

alex-rich Alex Rich

The 2016 Hackaday Prize

A set of designs to facilitate teaching and intuitive understanding of the relationship between electricity and magnetism

Electromagnetic Teaching Aid

adam-smallcomb Adam Smallcomb

Home Automation and Monitoring System with many sensors and actuators to keep your home safe

ED-E: Home Automation and Monitoring System

The 2015 Hackaday Prize

small seven segment display for plugging on an ISP programming header of an Atmel Board or an Arduino

tiny7

Generally we have only seen drones fly, but how cool would it be if we can maneuver it on the ground as well!

HYBRID DRONE

shivani SHIVANI

An OpenSCAD library for parametrically generating ABLOY PROTEC keys suitable for 3D printing

Protec 3D Printing

tiernan Tiernan

A 20 character retro-display word clock in 5 minute increments

Five minute clock

2x3/2x5 IDC 2.54mm, 2x3 Pogo pin 1.27/2.54mm

AVR-ISP Pogo Pin Adapters

The 2018 Hackaday Prize

Using ninjaflex, I have revived a dead Phillips CD-i

3D printed belt for Phillips CD-i

An analog clock that displays the time using WS2812 LEDs instead of physical hands.

RGB LED Analog Clock

jackw01 jackw01

Cheap WiFi Module for Internet of Things (IoT) projects

ESP8266 Arduino Tutorial and Review

View all

Bits