0%

0%

thodoris903

Just graduated highschool and applied for an IT University...I have a weird love and fascination for 3D printing and CNC

Thessaloniki, Greece

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/30/2022.

My Projects

A cnc mill for a low budget but an adequate size

CNC Mill Project

Projects I Like & Follow

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

Implement the fantastic robotic packages offered by the TurtleBot3 robot on a budget without sacrificing features and performances.

Build your own TurtleBot 3 backbone

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

Clock that chimes on the hours, halves, quarters

Chiming Clock

The 2018 Hackaday Prize

Self-Powered IoT Node for Environmental Sensing

SPINES Mote

I found myself being intrigued with the low level safety features of my X201. I experimented with the I2C bus and it got interesting...

Hacking a Supervisor Password - With a Beagle Bone

timo-birnschein Timo Birnschein

Combine an ultrasonic ranging sensor with some addressable LEDs to help position your car in the garage with accuracy

ESP32-based Precision Parking Assist

reverse engineering a cheap laser engraver protocol

Hacking K3 Laser Engraver

marcel-ochsendorf Marcel Ochsendorf

Emulate a small size ROM with a RAM and Arduino with Intel-HEX interface

ROM-emulator

fjkraan fjkraan

PCB-to-control-Stepper-motor-without-arduino

PCB-to-control-Stepper-motor-without-arduino

This project is about creating a gaming controller system that combines a locomotion system, hands exoskeleton, head tracking and aiming

Gaming controller:locomotion,hand,aim,headtracking

A mobile phone built using the arduino nano board

Arduino Phone

xtreme-tech Xtreme Tech

Large Humanoid Robot 150cm With lightweight plastic design and originally planned for walking

Large Humanoid Robot

Jumbled digits on clockface, but hands still point to the correct digits

Jumbled Clock

michael-mller Michael Möller

We are the electronics designer team with science background and at free time was prepare some IoT devices with new features.

High-performance IoT devices with low cost BOM

maxim-grigoryev Maxim Grigoryev

Analog 3 axis 3D printed JOYSTICK using FiberGrid.

3D printed Joystick

A resin based 3D printer that automatically cleans, dries and cure's the print

Fully automated resin 3D printer

kenneth Kenneth

View all

Bits