0%

0%

Valery

I am an experienced software and hardware designer in the Moscow area, and have worked in the game industry for the last 20 year

Moscow

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/25/2019.

My Projects

This quick project implements a coil winding machine with an ESP32 SoC and two stepper motors.

CoilWinder based on grbl for ESP32

The linear motor was a compact, ironless design with flat coils and magnets. It was intended for use in experimental haptic applications.

DIY Linear Motor Experiment

The project was to create and prototype hand tracking gloves for VR.

Hand tracking gloves

The product is a prototype rifle with haptic feedback for Oculus Quest.

The haptic feedback rifle for Oculus Quest

Projects I Like & Follow

Hackaday Prize 2019

Homemade 8MHz Z80 SBC, 128kB banked RAM, RTC, SD (HD emulation), Basic and Forth interpreters, CP/M 2.2 and 3, cross Assembler and C (SDCC)

Z80-MBC2: a 4 ICs homebrew Z80 computer

ESP-32 WROOM-32D has Three phase Centre Aligned MC-PWM, Dual SPI, I2C, 2MHz ADC, UART and CAN. Enough for a controller.

ESP-32 BLDC Robot Actuator Controller

Open source multimeter that measures more for less

DIY 6-digit multimeter

The 2018 Hackaday Prize

PDP-11 compatible motherboard in mini-ITX form factor

PDPii

AVR-based bootloader and IO card for RC2014 retrocomputer

z80ctrl

Step-by-step instruction on building a high-performance, CP/M-ready, expandable Z80 computer

Building a 22MHz Z80 Computer in 4 Stages

A 65c816-based MiniITX motherboard.

Neon816

Based on Tiny030 design

Building a 68030 computer in 5 stages

If it can output VGA, it can be turned into ASCII art.

Realtime VGA ASCII Art Converter

The 2018 Hackaday Prize

Software and Hardware to make Word Clocks easier to make

Confagrid

The 2018 Hackaday Prize

Do you want a drone ready to be in the air 24 hours/day, 7 days/week? We're propossing this automatized drone supercharger. Go up darling!!!

Drone Supercharger

frasanz frasanz

made only out of about 450 bipolar transistors (BC182)

Homebrew 4-bit transistorized CPU

Putting together a minimal LSI-11/23 from boards & parts

Building a PDP-11

reverse engineering a cheap laser engraver protocol

Hacking K3 Laser Engraver

marcel.ochsendorf

Unofficial Badge of Talent Land 2018

The badge of the Lands

The ultimate tutorial on how to deal with Raspbian and other Raspberry Pi Software

Raspbian and other Raspberry Pi Software

Hackaday has a chat for everything except drones

Chat for Drones

Video to analogue VGA and digital LCD panels.

STEbus VGA and LCD

View all

Bits