0%

0%

ferdinadfloo0

heppy

indonesia

Following Follow me

Similar accounts worth following

This user joined on 12/11/2019.

Projects I Like & Follow

Internet radio and BT speaker in a small form factor with minimalistic user interface

ESP32-based internet radio and bluetooth speaker

Hackaday Prize 2019

An almost completly 3D-printed tank equipped with an FPV system to explore and discover the unknown

RC FPV tank rover

brian-brocken Brian Brocken

Remote presence robot using a Raspberry Pi and 3d printed tracked platform

TTBN Alpha

tinhead TinHead

2021 Hackaday Prize

Animabot is a 3D printed hexapod robot created to be a daily life companion to interact with people and its environment.

Animabot - Advanced Hexapod Robot

Embedding addressable RGB LEDs (WS2812/Neopixel) in a 3D printed Christmas tree to have a nice diffusion effect.

Embedded LED 3D Printed Christmas Tree

Some months ago I found a "forgotten" Z8 BASIC/DEBUG (Z8671 aka Z0867108) MCU, so I decided to give it a new "home" (a board...)

RC-Z8BASIC: a Z8 BASIC/DEBUG homebrew computer

Daily log of the my projects, ideas, tips, failures, etc.

2017: A Year of Hacking

eric-moyer Eric Moyer

Breathing new life into a Stratasys Dimension 768 with a Smoothieboard 5X

3D printer brain retrofit

Attempt to dive into 3D printing

3D Printer

A (sort of) low cost CNC with broad capabilities and low storage volume

High performance dorm room CNC

oscar-s Oscar S.

I bought one of the ill-fated Makibox 3D printer 4 years ago. Time to make it earn it's keep - but as something it was not intended to be.

Turning a Makibox into a PCB Mill

myles-eftos Myles Eftos

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

3 axis CNC machine

SUZIE MODEL ONE - CNC

rui-caldas Rui Caldas

The 2018 Hackaday Prize

BevelCNC is an Open Source, ultra low cost and large format CNC that can be built with just a 3D printer and a trip to the hardware store.

BevelCNC - Big Machine, Small Budget

Design of involute gear tooth profiles and hints and tips for 3D printing real gears to do work.

3D Printing Gears and a Planetary Gearbox

We're Going to the 36th Chaos Communication Congress, and You're Coming With Us!

[Hackaday] @ 36C3

elliot-williams Elliot Williams

An example of a microcontroller breakout of the MSP430G2553 from Texas Instruments

1-Hour Board KiCAD Tutorial

andrew-kowalczyk Andrew Kowalczyk

Logging up to 40 temperature sensors installed in to a bore hole drilled in the side of Mt Erebus.

Antarctica - Mt Erebus - Temperature Logger

boris-van-galvin Boris van Galvin

View all

Bits